gpt-3.5-turbo-0613· OpenAI
WildChat-4.8M (AI2)
host操作emmc5.1的secure wp流程c代码
- User
host操作emmc5.1的secure wp流程c代码
- Assistant
以下是一个示例代码,展示了如何在Host操作eMMC 5.1上的Secure Write Protect(SWP)流程:
#include <stdio.h> #include <stdint.h> #define CMD_ERASE_GROUP (0x38) // eMMC CMD6 - Switch Function void emmc_cmd6_switch_function(uint32_t arg, uint32_t* response) { // Send CMD6 command to eMMC // ... // Wait for response // ... // Process response // ... } // eMMC CMD38 - Erase Group Start void emmc_cmd38_erase_group_start(uint32_t arg) { // Send CMD38 erase group start command to eMMC // ... // Wait for response // ... // Process response // ... } int main() { uint32_t switch_arg = 0x03B70000; // Arg = 59h (Write Protect Group), Function = 4h (Set WR_REL_WR) uint32_t group_start_arg = 0x00000000; // Arg = 0 (Group 0) // Step 1: Switch to Write Protect Group Function emmc_cmd6_switch_function(switch_arg); // Step 2: Send Erase Group Start command emmc_cmd38_erase_group_start(group_start_arg); // Step 3: Wait for erase operation to complete // ... // Step 4: Switch back to default function (Write Protect Off) switch_arg = 0x03B30000; // Arg = 59h (Write Protect Group), Function = 0h (Set Default) emmc_cmd6_switch_function(switch_arg); return 0; }请注意,以上代码只是一个示例,具体的实现可能因使用的平台和驱动程序而有所不同。您可能需要根据您的具体设备和平台进行适当的修改。另外,该示例只提供了SWP流程的基本框架,具体细节(例如发送命令和处理响应)可能需要根据eMMC控制器和驱动程序的要求进行实现。
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.