Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0613· OpenAIAi2 WildChat-4.8M (AI2)

Calculate the start and end dates for the dataframe startdate =…

  1. User

    Calculate the start and end dates for the dataframe

    start_date = pd.to_datetime('2022-01-03') end_date = start_date + pd.offsets.MonthEnd(12)

    Filter 'wind_power_TN_sum' for the current month

    wind_power_tso_sum.index = pd.to_datetime(wind_power_tso_sum.index)

    Convert index of 'wind_power_tso_sum' DataFrame to Timestamp type

    wind_power_tso_sum_filtered = wind_power_tso_sum.loc[start_date:end_date]

    Filter 'EC_Solar_Wind' for the current month, localize index to None, and resample to hourly frequency

    EC_Solar_Wind_resampled = EC_Solar_Wind.tz_localize(None).loc[start_date:end_date].resample('H').mean()

    Define names of columns

    TSOs = ['TransnetBW', 'TenneT', 'Amprion', '50Hertz'] TSOs_EC = ['Wind onshore Transnet BW', 'Wind onshore Tennet', 'Wind onshore Amprion', 'Wind onshore 50Hertz']

    Summary

    model_max = wind_power_tso_sum_filtered[TSOs].max() EC_max = EC_Solar_Wind_resampled[TSOs_EC].max() model_max_err = pd.DataFrame(model_max.values-EC_max.values) model_max_err.index = model_max.index

    Empty dict for errors of each TSO

    model_errors = {}

    Subplots: Looping analysis of error calculations per TSO

    fig, axs = plt.subplots(2, 2, figsize=(18, 12), dpi=300) for idx, (TSO, TSO_EC) in enumerate(zip(TSOs, TSOs_EC)):

    # Calculate the error between the wind powers
    model_TSO = wind_power_tso_sum_filtered[TSO]
    EC_TSO = EC_Solar_Wind_resampled[TSO_EC] 
    
    model_error = abs(model_TSO - EC_TSO)  # absolute error 
    precent_err = (model_error / EC_TSO) * 100  # percentage error 
    
    model_errors[TSO] = {'Maximum Error': model_error.max(),
                         'Minimum Error': model_error.min(),
                         'Mean Absolute Error': model_error.mean(),
                         'Mean Square Error' : ((model_TSO - EC_TSO) ** 2).mean(),
                         'Root Mean Square Error': np.sqrt((((model_TSO - EC_TSO) ** 2).mean()))
                        }
    
    max_power = max(model_TSO.max(), EC_TSO.max())
    range_value = round(max_power / 24, 1)
    num_ranges = int(max_power / range_value) + 1
    
    mismatch_ranges = [(i * range_value, (i + 1) * range_value) for i in range(num_ranges)]
    mismatch_sums = []
    
    for start, end in mismatch_ranges:
        mask = (model_TSO >= start) & (model_TSO < end)
        mismatch_sums.append(model_error[mask].mean())
    
    x_labels = [f'{round(start, 2)} - {round(end, 2)}' for start, end in mismatch_ranges]
    x_pos = range(len(x_labels))
    
    # Define color palette based on the values of mismatch_sums
    color_map = cm.get_cmap('autumn').reversed()
    
    # Calculate the minimum and maximum values of mismatch_sums
    min_value = min(mismatch_sums)
    max_value = max(mismatch_sums)
    
    # Adjust the range for desired color intensity between 0.5 and 1
    adjusted_min = min_value - (max_value) * 0.5
    adjusted_max = max_value
    
    # Normalize the values within the adjusted range
    norm = plt.Normalize(adjusted_min, adjusted_max)
    colors = color_map(norm(mismatch_sums))
    
    # Plot the subplot
    ax = axs[idx // 2, idx % 2]  # Get the appropriate subplot axes
    ax.bar(x_pos, mismatch_sums, align='center', alpha=0.9, color=colors)
    ax.set_xticks(x_pos)
    ax.set_xticklabels(x_labels, fontsize=12, rotation=90)
    # ax.set_yticks(fontsize=12)
    
    if idx in [0, 2]:  # Leftmost subplots
        ax.set_ylabel('Sum of Absolute Error (GW)', fontsize=14)
    if idx in [2, 3]:  # Bottom subplots
        ax.set_xlabel('Power Range (GW)', fontsize=14)
    
    ax.set_title(f'Model vs. {TSO}', fontsize=16)
    ax.grid(axis='y')
    ax.margins(0.05)
    

    Add a title for the entire plot

    fig.suptitle('Mean Absolute Error: Model vs. TSO - Onshore Wind Power 2022', fontsize=18)

    Adjust the spacing between subplots

    plt.tight_layout(rect=[0, 0, 1, 0.96])

    Save the figure

    plt.savefig(dirname+'\output\Wind_Power_Analysis_TSO_V01\Avg_Error_Onshore_Model_vs_TSOs_2022.png', dpi=300, bbox_inches='tight')

    Show the figure

    plt.show()

    Change the code to to generate plots for mean, max, min, and sum instead of just model_error[mask].mean()

  2. Assistant

    To generate plots for mean, max, min, and sum, you can modify the code as follows:

    # Empty dict for errors of each TSO 
    model_errors = {}
    # Subplots: Looping analysis of error calculations per TSO
    fig, axs = plt.subplots(2, 2, figsize=(18, 12), dpi=300)
    for idx, (TSO, TSO_EC) in enumerate(zip(TSOs, TSOs_EC)):
        
        # Calculate the error between the wind powers
        model_TSO = wind_power_tso_sum_filtered[TSO]
        EC_TSO = EC_Solar_Wind_resampled[TSO_EC] 
        
        model_error = abs(model_TSO - EC_TSO)  # absolute error 
        precent_err = (model_error / EC_TSO) * 100  # percentage error 
        
        model_errors[TSO] = {'Mean Absolute Error': model_error.mean(),
                             'Maximum Error': model_error.max(),
                             'Minimum Error': model_error.min(),
                             'Sum Absolute Error': model_error.sum(),
                             'Mean Error': model_error.mean(),
                             'Max Error': model_error.max(),
                             'Min Error': model_error.min()
                            }
        
        max_power = max(model_TSO.max(), EC_TSO.max())
        range_value = round(max_power / 24, 1)
        num_ranges = int(max_power / range_value) + 1
        
        mean_errors = []
        max_errors = []
        min_errors = []
        sum_errors = []
        
        for start, end in mismatch_ranges:
            mask = (model_TSO >= start) & (model_TSO < end)
            mean_errors.append(model_error[mask].mean())
            max_errors.append(model_error[mask].max())
            min_errors.append(model_error[mask].min())
            sum_errors.append(model_error[mask].sum())
        
        x_labels = [f'{round(start, 2)} - {round(end, 2)}' for start, end in mismatch_ranges]
        x_pos = range(len(x_labels))
        
        # Define color palette based on the values of mean_errors
        color_map = cm.get_cmap('autumn').reversed()
        
        # Calculate the minimum and maximum values of mean_errors
        min_mean = min(mean_errors)
        max_mean = max(mean_errors)
        
        # Adjust the range for desired color intensity between 0.5 and 1
        adjusted_min = min_mean - (max_mean) * 0.5
        adjusted_max = max_mean
        
        # Normalize the values within the adjusted range
        norm = plt.Normalize(adjusted_min, adjusted_max)
        colors = color_map(norm(mean_errors))
        
        # Plot the subplot
        ax = axs[idx // 2, idx % 2]  # Get the appropriate subplot axes
        ax.bar(x_pos, mean_errors, align='center', alpha=0.9, color=colors)
        ax.set_xticks(x_pos)
        ax.set_xticklabels(x_labels, fontsize=12, rotation=90)
        # ax.set_yticks(fontsize=12)
        
        if idx in [0, 2]:  # Leftmost subplots
            ax.set_ylabel('Mean Error (GW)', fontsize=14)
        if idx in [2, 3]:  # Bottom subplots
            ax.set_xlabel('Power Range (GW)', fontsize=14)
        
        ax.set_title(f'Model vs. {TSO}', fontsize=16)
        ax.grid(axis='y')
        ax.margins(0.05)
        
        # Adding additional subplots for max, min, and sum errors
        
        ax2 = ax.twinx()
        ax2.plot(x_pos, max_errors, linestyle='--', marker='o', color='red')
        ax2.set_ylabel('Max Error (GW)', fontsize=14)
        
        ax3 = ax.twinx()
        ax3.plot(x_pos, min_errors, linestyle='--', marker='o', color='green')
        ax3.set_ylabel('Min Error (GW)', fontsize=14)
        
        ax4 = ax.twinx()
        ax4.plot(x_pos, sum_errors, linestyle='--', marker='o', color='blue')
        ax4.set_ylabel('Sum Error (GW)', fontsize=14)
    
    # Add a title for the entire plot
    fig.suptitle('Error Analysis: Model vs. TSO - Onshore Wind Power 2022', fontsize=18)
    
    # Adjust the spacing between subplots
    plt.tight_layout(rect=[0, 0, 1, 0.96])
    
    # Save the figure
    # plt.savefig(dirname+'\output\Wind_Power_Analysis_TSO_V01\Error_Analysis_Onshore_Model_vs_TSOs_2022.png', dpi=300, bbox_inches='tight')
    
    # Show the figure
    plt.show()
    

    This modified code will generate four subplots for each TSO, showing the mean, max, min, and sum errors between the model and TSO onshore wind power data. The mean error is represented by a bar plot, while the max, min, and sum errors are shown as separate lines on the same subplot.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.