Skip to content
The Chat Archive
gpt-3.5-turbo-0613· OpenAI WildChat-4.8M (AI2)

For the code below, instead of using 'For Each cell In rngG, I want the code to focus…

  1. User

    For the code below, instead of using 'For Each cell In rngG, I want the code to focus only on the "Target Cell" and the Target Row

    Set rngG = Intersect(Target, Range("G6:G500"))
    If Not rngG Is Nothing Then
        For Each cell In rngG
            If cell.Value = "" Then
            'End If
                Exit Sub
            'ElseIf IsNumeric(cell.Value) Then
            If IsNumeric(cell.Value) Then
            If IsDate(cell.Offset(0, 2).Value) = False Then
                        MsgBox "Date Service Completed not present"
                        End If
                        End If
                    Exit Sub
                'ElseIf cell.Offset(0, -5).Value <> "Service" Then
            If IsNumeric(cell.Value) Then
            If cell.Offset(0, -5).Value <> "Service" Then
                        MsgBox "Service Schedule Days must ONLY be entered for Services"
                        End If
                    Exit Sub
                'Else
            If IsNumeric(cell.Value) Then
            If IsDate(cell.Offset(0, 2).Value) <> False And cell.Offset(0, -5).Value = "Service" Then
                    MsgBox "A New Service row will now be created"
                    cell.Offset(0, -5).Value = "Serviced"
                    cell.Offset(0, 1).Value = ""
                    Dim newRow As Long
                    newRow = Cells(Rows.Count, "B").End(xlUp).Row + 1
                    Range("B" & newRow).Value = "Service"
                    Range("C" & newRow).Value = cell.Offset(0, 2).Value
                    Range("F" & newRow).Value = cell.Offset(0, -1).Value
                    Range("J" & newRow).Value = cell.Offset(0, 3).Value
                    Range("L" & newRow).Value = cell.Offset(0, 5).Value
                    Range("H" & newRow).Value = cell.Offset(0, 2).Value + cell.Value
                    Exit Sub
                End If
                End If
        Next cell
    End If
    

    Exit Sub

  2. Assistant

    To focus only on the "Target Cell" and the Target Row, you can remove the 'For Each cell In rngG' loop and replace 'cell' with 'Target' in the code.

    Here's the modified code:

    Set rngG = Intersect(Target, Range("G6:G500"))
    If Not rngG Is Nothing Then
        If rngG.Value = "" Then
            Exit Sub
        ElseIf IsNumeric(rngG.Value) Then
            If IsDate(rngG.Offset(0, 2).Value) = False Then
                MsgBox "Date Service Completed not present"
            End If
            Exit Sub
        ElseIf IsNumeric(rngG.Value) Then
            If rngG.Offset(0, -5).Value <> "Service" Then
                MsgBox "Service Schedule Days must ONLY be entered for Services"
            End If
            Exit Sub
        ElseIf IsNumeric(rngG.Value) Then
            If IsDate(rngG.Offset(0, 2).Value) <> False And rngG.Offset(0, -5).Value = "Service" Then
                MsgBox "A New Service row will now be created"
                rngG.Offset(0, -5).Value = "Serviced"
                rngG.Offset(0, 1).Value = ""
                Dim newRow As Long
                newRow = Cells(Rows.Count, "B").End(xlUp).Row + 1
                Range("B" & newRow).Value = "Service"
                Range("C" & newRow).Value = rngG.Offset(0, 2).Value
                Range("F" & newRow).Value = rngG.Offset(0, -1).Value
                Range("J" & newRow).Value = rngG.Offset(0, 3).Value
                Range("L" & newRow).Value = rngG.Offset(0, 5).Value
                Range("H" & newRow).Value = rngG.Offset(0, 2).Value + rngG.Value
                Exit Sub
            End If
        End If
    End If
    Exit Sub
    

    Note: The code assumes that there is only one cell selected as the "Target Cell". If multiple cells are selected, the code will only focus on the first cell in the selection.

  3. User

    For the code below, instead of using 'For Each cell In rngI, I want the code to focus only on the "Target Cell" and the Target Row

    Set rngI = Intersect(Target, Range("I6:I500"))
    If Not rngI Is Nothing Then
        For Each cell In rngI
            If IsDate(cell.Value) Then
                If cell.Offset(0, -7).Value = "Service" Then
                        MsgBox "Thank you for entering Service Date Completed. Please proceed to enter Service Schedule as number of days."
                        cell.Offset(0, -2).Select
                        Exit Sub
                    Else
                    If cell.Offset(0, -7).Value <> "Service" Then
                    If Not doubleClickFlag Then
                        MsgBox "Please proceed to change the Issue description ( column B ) as required."
                        cell.Offset(0, -7).Select
                End If
                End If
                Exit For
            End If
            End If
        Next cell
    doubleClickFlag = False
    

    Exit Sub

  4. Assistant

    To focus only on the "Target Cell" and the Target Row, you can remove the 'For Each cell In rngI' loop and replace 'cell' with 'Target' in the code.

    Here's the modified code:

    Set rngI = Intersect(Target, Range("I6:I500"))
    If Not rngI Is Nothing Then
        If IsDate(rngI.Value) Then
            If rngI.Offset(0, -7).Value = "Service" Then
                MsgBox "Thank you for entering Service Date Completed. Please proceed to enter Service Schedule as number of days."
                rngI.Offset(0, -2).Select
                Exit Sub
            Else
                If rngI.Offset(0, -7).Value <> "Service" Then
                    If Not doubleClickFlag Then
                        MsgBox "Please proceed to change the Issue description (column B) as required."
                        rngI.Offset(0, -7).Select
                    End If
                End If
            End If
        End If
    End If
    doubleClickFlag = False
    Exit Sub
    

    Note: The code assumes that there is only one cell selected as the "Target Cell". If multiple cells are selected, the code will only focus on the first cell in the selection.

  5. User

    For the code below, instead of using 'For Each cell In rngI, I want the code to focus only on the "Target Cell" and the Target Row

    Set rngI = Intersect(Target, Range("I6:I500"))
    If Not rngI Is Nothing Then
        For Each cell In rngI
            If IsDate(cell.Value) Then
                If cell.Offset(0, -7).Value = "Service" Then
                        MsgBox "Thank you for entering Service Date Completed. Please proceed to enter Service Schedule as number of days."
                        cell.Offset(0, -2).Select
                        Exit Sub
                    Else
                    If cell.Offset(0, -7).Value <> "Service" Then
                    If Not doubleClickFlag Then
                        MsgBox "Please proceed to change the Issue description ( column B ) as required."
                        cell.Offset(0, -7).Select
                End If
                End If
                Exit For
            End If
            End If
        Next cell
    doubleClickFlag = False
    

    Exit Sub

  6. Assistant

    To focus only on the "Target Cell" and the Target Row, you can remove the 'For Each cell In rngI' loop and replace 'cell' with 'Target' in the code.

    Here's the modified code:

    Set rngI = Intersect(Target, Range("I6:I500"))
    If Not rngI Is Nothing Then
        If IsDate(rngI.Value) Then
            If rngI.Offset(0, -7).Value = "Service" Then
                MsgBox "Thank you for entering Service Date Completed. Please proceed to enter Service Schedule as number of days."
                rngI.Offset(0, -2).Select
                Exit Sub
            Else
                If rngI.Offset(0, -7).Value <> "Service" Then
                    If Not doubleClickFlag Then
                        MsgBox "Please proceed to change the Issue description (column B) as required."
                        rngI.Offset(0, -7).Select
                    End If
                End If
                Exit For
            End If
        End If
    End If
    doubleClickFlag = False
    Exit Sub
    

    Note: The code assumes that there is only one cell selected as the "Target Cell". If multiple cells are selected, the code will only focus on the first cell in the selection.

  7. User

    When I enter a number into any cell in column 'G' the code below is not triggered.

    Set rngG = Intersect(Target, Range("G6:G500")) If Not rngG Is Nothing Then doubleClickFlag = False If rngG.Value = "" Then Exit Sub ElseIf IsNumeric(rngG.Value) Then If IsDate(rngG.Offset(0, 2).Value) = False Then MsgBox "Date Service Completed not present" End If Exit Sub ElseIf IsNumeric(rngG.Value) Then If rngG.Offset(0, -5).Value <> "Service" Then MsgBox "Service Schedule Days must ONLY be entered for Services" End If Exit Sub ElseIf IsNumeric(rngG.Value) Then If IsDate(rngG.Offset(0, 2).Value) <> False And rngG.Offset(0, -5).Value = "Service" Then MsgBox "A New Service row will now be created" rngG.Offset(0, -5).Value = "Serviced" rngG.Offset(0, 1).Value = "" Dim newRow As Long newRow = Cells(Rows.Count, "B").End(xlUp).Row + 1 Range("B" & newRow).Value = "Service" Range("C" & newRow).Value = rngG.Offset(0, 2).Value Range("F" & newRow).Value = rngG.Offset(0, -1).Value Range("J" & newRow).Value = rngG.Offset(0, 3).Value Range("L" & newRow).Value = rngG.Offset(0, 5).Value Range("H" & newRow).Value = rngG.Offset(0, 2).Value + rngG.Value Exit Sub End If End If End If Exit Sub

  8. Assistant

    The code you provided should be triggered when entering a number into any cell in column 'G'. However, there might be some issues with the code that prevent it from running correctly. Here are a few suggestions to troubleshoot the issue:

    1. Make sure the code is placed in the appropriate event handler. Check that it is located within the worksheet module that corresponds to the sheet where you are entering the numbers in column 'G'. The code should be placed in the Worksheet_Change event.

    2. Enable Events: In some cases, events may be temporarily disabled, which could prevent the code from running. To ensure events are enabled, you can add the line Application.EnableEvents = True at the beginning of your code.

    3. Check for other conflicting code: If you have other event handlers or macros in the worksheet module, they may conflict with the code you provided. Temporarily disable any other code and test if the issue persists.

    4. Review data validation: It's possible that there is data validation or other restrictions in place that prevent values from being entered in column 'G'. Review any data validation rules or conditional formatting that may be affecting the behavior.

    If you're still experiencing issues, providing additional details or the full code in the worksheet module would be helpful to further investigate the problem.