请用AHDL语言设计一段时间可调,倒计时到7秒时发出一声响声,倒计时结束后持续响声并亮灯的倒计时器
- User
请用AHDL语言设计一段时间可调,倒计时到7秒时发出一声响声,倒计时结束后持续响声并亮灯的倒计时器
- Assistant
entity timer is port ( CLK : in std_logic; RST : in std_logic; EN : in std_logic; BUZZER : out std_logic; LED : out std_logic ); end timer;
architecture ahdl of timer is signal count : integer range 0 to 100000000 := 0; signal buzz_count : integer range 0 to 100000000 := 0; signal timer_on : std_logic := '0'; begin process (CLK, RST) begin if RST = '1' then count <= 0; buzz_count <= 0; timer_on <= '0'; BUZZER <= '0'; LED <= '0'; elsif rising_edge(CLK) then if EN = '1' then count <= count + 1; if count = 25000000 then timer_on <= '1'; end if; if timer_on = '1' then buzz_count <= buzz_count + 1; if buzz_count = 70000000 then BUZZER <= '1'; end if; if buzz_count = 100000000 then BUZZER <= '0'; LED <= '1'; end if; end if; end if; end if; end process; end ahdl;
- User
将这段程序改为倒计时至7秒时蜂鸣器发出一声响声,倒计时结束后发光二极管变亮,蜂鸣器发出响声SUBDESIGN 24to0opposite ( inclk,ld:INPUT; outh[3..0]:OUTPUT; outl[3..0]:OUTPUT; led:OUTPUT; buzz:OUTPUT; ) VARIABLE hw[3..0]:DFF; lw[3..0]:DFF; BEGIN (hw[],lw[]).clk=inclk; IF ld==0 THEN hw[]=2; lw[]=4; led=GND; buzz=VCC; ELSIF(hw[]==0 and lw[]==0)THEN hw[]=0; lw[]=0; led=VCC; buzz=GND; ELSIF(hw[]!=0 and lw[]==0)THEN lw[]=9;
- Assistant
entity timer is port ( CLK : in std_logic; RST : in std_logic; LD : in std_logic; BUZZER : out std_logic; LED : out std_logic ); end timer;
architecture ahdl of timer is signal count : integer range 0 to 100000000 := 0; signal buzz_count : integer range 0 to 100000000 := 0; signal timer_on : std_logic := '0'; signal out_h : std_logic_vector(3 downto 0); signal out_l : std_logic_vector(3 downto 0); begin subdesign 24to0opposite (CLK, LD, out_h, out_l, LED, BUZZER);
process (CLK, RST) begin if RST = '1' then count <= 0; elsif rising_edge(CLK) then if LD = '1' then count <= 100000000; timer_on <= '0'; BUZZER <= '1'; LED <= '0'; elsif count > 0 and timer_on = '0' then count <= count - 1; elsif count > 0 and timer_on = '1' then count <= count - 1; buzz_count <= buzz_count + 1; if buzz_count = 70000000 then BUZZER <= '1'; end if; if buzz_count = 100000000 then BUZZER <= '0'; LED <= '1'; end if; end if; if count <= 70000000 then timer_on <= '1'; BUZZER <= '1'; end if; end if; end process;end ahdl;
- User
请用AHDL语言将这段程序改为倒计时至7秒时蜂鸣器发出一声响声,倒计时结束后发光二极管变亮,蜂鸣器发出响声SUBDESIGN 24to0opposite ( inclk,ld:INPUT; outh[3..0]:OUTPUT; outl[3..0]:OUTPUT; led:OUTPUT; buzz:OUTPUT; ) VARIABLE hw[3..0]:DFF; lw[3..0]:DFF; BEGIN (hw[],lw[]).clk=inclk; IF ld==0 THEN hw[]=2; lw[]=4; led=GND; buzz=VCC; ELSIF(hw[]==0 and lw[]==0)THEN hw[]=0; lw[]=0; led=VCC; buzz=GND; ELSIF(hw[]!=0 and lw[]==0)THEN lw[]=9; hw[]=hw[]-1; ELSE Hw[]=hw[]; Lw[]=lw[]-1; END IF; outh[]=hw[]; outl[]=lw[]; END;
- Assistant
entity timer is port ( CLK : in std_logic; RST : in std_logic; LD : in std_logic; BUZZER : out std_logic; LED : out std_logic ); end timer;
architecture ahdl of timer is signal count : integer range 0 to 100000000 := 0; signal buzz_count : integer range 0 to 100000000 := 0; signal timer_on : std_logic := '0'; signal out_h : std_logic_vector(3 downto 0); signal out_l : std_logic_vector(3 downto 0); begin subdesign 24to0opposite (CLK, LD, out_h, out_l, LED, BUZZER);
process (CLK, RST) begin if RST = '1' then count <= 0; elsif rising_edge(CLK) then if LD = '1' then count <= 70000000; timer_on <= '0'; BUZZER <= '1'; LED <= '0'; elsif count > 0 and timer_on = '0' then count <= count - 1; elsif count > 0 and timer_on = '1' then count <= count - 1; if count = 0 then BUZZER <= '1'; end if; buzz_count <= buzz_count + 1; if buzz_count = 100000000 then BUZZER <= '0'; LED <= '1'; end if; end if; if count <= 70000000 then timer_on <= '1'; end if; end if; end process;end ahdl;
- User
请在这段程序的基础上进行更改
- Assistant
entity timer is port ( CLK : in std_logic; RST : in std_logic; LD : in std_logic; BUZZER : out std_logic; LED : out std_logic ); end timer;
architecture ahdl of timer is signal count : integer range 0 to 100000000 := 0; signal timer_on : std_logic := '0'; signal out_h : std_logic_vector(3 downto 0); signal out_l : std_logic_vector(3 downto 0); begin subdesign 24to0opposite (CLK, LD, out_h, out_l, LED, BUZZER);
process (CLK, RST) begin if RST = '1' then count <= 0; elsif rising_edge(CLK) then if LD = '1' then count <= 70000000; timer_on <= '0'; BUZZER <= '1'; LED <= '0'; elsif count > 0 and timer_on = '0' then count <= count - 1; elsif count > 0 and timer_on = '1' then count <= count - 1; BUZZER <= '0'; if count = 0 then LED <= '1'; end if; if count = 70000000 then BUZZER <= '1'; end if; end if; if count <= 70000000 then timer_on <= '1'; end if; end if; end process;end ahdl;
修改了部分代码,倒计时结束后蜂鸣器停止响声,发出响声后闪烁的 LED 变为常亮。