Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0301· OpenAIAi2 WildChat-4.8M (AI2)

Explain line by line following configuration of Huawei AR6280 Router in detail: sysname…

  1. User

    Explain line by line following configuration of Huawei AR6280 Router in detail:

    sysname pokhara-CR-AR6280-01

    board add 0/3 4ES2G-S board add 0/4 4ES2G-S

    drop illegal-mac alarm

    clock timezone Asia/Kathmandu add 05:45:00

    ipv6

    vlan batch 2 to 2000

    authentication-profile name default_authen_profile authentication-profile name dot1x_authen_profile authentication-profile name dot1xmac_authen_profile authentication-profile name mac_authen_profile authentication-profile name multi_authen_profile authentication-profile name portal_authen_profile

    lldp enable

    dhcp enable

    ecc peer-public-key 10.0.1.4 encoding-type der public-key-code begin 04015FAB F40D469D 88255BD2 BEA86C52 E5516003 474E6971 2F9DC0D3 BEA5CBA2 A90BC18F BFAE2EF5 46F23F56 D4930DC3 8BA4988A 59D80862 A7CEB764 4ACA6EE0 D39F0A00 EB2E27B2 FDA1F4FE 488287BC 1A555CCC BDF30C39 CC1BE21E A34196B9 5CBA6D54 C534F7B8 39F91312 509DDF46 F906AB7E 1D609713 71C9577E 82BCF166 41245591 91 public-key-code end peer-public-key end

    ecc peer-public-key 10.0.1.2 encoding-type der public-key-code begin 04001C30 47282860 652AA13B 4A9783E5 78370275 95CE2514 BB5B5588 64DC0388 2014D73D DB57A919 4D554BF8 97AA9841 05309F9E 4CA692B7 70A35AFF 4F580004 25450801 8487E749 D4BD16AD A58EC551 2CE45516 9DA76B1B 58187689 F465BDE5 6FFFC546 DC1E3BE7 B7A9C123 8FA04371 69E5C52B ED89E1B6 D30BA99F 24DFFEC2 3318F21C B7 public-key-code end peer-public-key end

    radius-server template default

    pki realm default

    ssl policy default_policy type server pki-realm default version tls1.2 ciphersuite rsa_aes_128_cbc_sha rsa_aes_128_sha256 rsa_aes_256_sha256 ecdhe_rsa_aes128_gcm_sha256 ecdhe_rsa_aes256_gcm_sha384

    ike proposal default encryption-algorithm aes-256 aes-192 aes-128 dh group14 authentication-algorithm sha2-512 sha2-384 sha2-256 authentication-method pre-share integrity-algorithm hmac-sha2-256 prf hmac-sha2-256

    free-rule-template name default_free_rule

    portal-access-profile name portal_access_profile

    ip pool test gateway-list 192.168.24.1 network 192.168.24.0 mask 255.255.252.0

    aaa authentication-scheme default authentication-scheme radius authentication-mode radius authorization-scheme default accounting-scheme default local-aaa-user password policy administrator domain default authentication-scheme default domain default_admin authentication-scheme default local-user admin password irreversible-cipher 1a-vxlEzBuR3$Oh`b47t#0JSJX%A{PQ0SuhJTS494=a_cB!1K6% local-user admin privilege level 15 local-user admin ftp-directory flash: local-user admin service-type terminal ssh http

    firewall zone Local

    interface MEth0/0/0 ip address 192.168.1.1 255.255.255.0 dhcp select interface

    interface Eth-Trunk2 undo portswitch description istack-01

    interface Eth-Trunk2.10 description User terminal dot1q termination vid 10 ip address 192.168.24.1 255.255.252.0 dhcp select global

    interface Eth-Trunk2.11 description Clock Display System dot1q termination vid 11 ip address 192.168.13.1 255.255.255.0

    interface Eth-Trunk2.12 description Flight Information Display System dot1q termination vid 12 ip address 192.168.14.254 255.255.255.0

    interface Eth-Trunk2.16 description CCTV dot1q termination vid 16 ip address 192.168.18.254 255.255.255.0

    interface Eth-Trunk2.17 description Access control dot1q termination vid 17 ip address 192.168.19.254 255.255.255.0

    interface Eth-Trunk2.18 description TV dot1q termination vid 18 ip address 192.168.20.254 255.255.255.0

    interface Eth-Trunk2.20 description Management dot1q termination vid 20 ip address 10.0.1.1 255.255.255.0

    interface Eth-Trunk2.25 description outdoor_camera dot1q termination vid 1000 ip address 192.168.25.254 255.255.255.0

    interface Eth-Trunk2.101 description Access Server dot1q termination vid 101 ip address 192.168.21.254 255.255.255.0

    interface Eth-Trunk2.200 description iBMC_OM1_IVS3000_01 dot1q termination vid 200 ip address 192.168.2.254 255.255.255.0

    interface Eth-Trunk2.203 description Outer_OM1_IVS3000_01 dot1q termination vid 203 ip address 192.168.10.254 255.255.255.0

    interface Eth-Trunk2.204 description Outer_Service1_IVS3000_01 dot1q termination vid 204 ip address 192.168.11.254 255.255.255.0

    interface Eth-Trunk2.205 dot1q termination vid 205 ip address 192.168.8.254 255.255.255.0

    interface Eth-Trunk2.208 description Outer_OM1_IVS3800_01 dot1q termination vid 208 ip address 192.168.9.254 255.255.255.0

    interface Eth-Trunk2.209 description Outer_Service1_IVS3800_01 dot1q termination vid 209 ip address 192.168.12.254 255.255.255.0

    interface GigabitEthernet0/0/0

    interface GigabitEthernet0/0/1

    interface GigabitEthernet0/0/2

    interface GigabitEthernet0/0/3

    interface GigabitEthernet0/0/4

    interface GigabitEthernet0/0/5

    interface GigabitEthernet0/0/6

    interface GigabitEthernet0/0/7

    interface GigabitEthernet0/0/8

    interface GigabitEthernet0/0/9

    interface GigabitEthernet0/0/10 description VirtualPort ipv6 enable ipv6 address auto link-local ipv6 address auto global default ip address dhcp-alloc ipv6 address auto dhcp

    interface GigabitEthernet3/0/0

    interface GigabitEthernet3/0/1

    interface GigabitEthernet3/0/2

    interface GigabitEthernet3/0/3

    interface GigabitEthernet4/0/0

    interface GigabitEthernet4/0/1

    interface GigabitEthernet4/0/2

    interface GigabitEthernet4/0/3

    interface XGigabitEthernet0/0/0

    interface XGigabitEthernet0/0/1

    interface XGigabitEthernet0/0/2

    interface XGigabitEthernet0/0/3

    interface XGigabitEthernet0/0/4

    interface XGigabitEthernet0/0/5

    interface XGigabitEthernet0/0/6

    interface XGigabitEthernet0/0/7

    interface XGigabitEthernet0/0/8

    interface XGigabitEthernet0/0/9

    interface XGigabitEthernet0/0/10 description to istack-01 eth-trunk 2

    interface XGigabitEthernet0/0/11 description to istack-01 eth-trunk 2

    interface XGigabitEthernet0/0/12 description to istack-01 eth-trunk 2

    interface XGigabitEthernet0/0/13 description to istack-01 eth-trunk 2

    interface NULL0

    interface LoopBack0 ip address 10.0.0.130 255.255.255.255

    snmp-agent local-engineid 800007DB03A400E2ADE038 snmp-agent community read %^%#e,Osk!cdRVr}I<kJF2/“;U5{@/P4&C-@<NV#&TQQ/Q3Zd&“q_kR6GA}M7cXH-3]oz0bKxAcS-h=%^%# snmp-agent community write %^%#gbGJ+h=wWWUROBqE+NE&['.J~l-P”[Bw!U;l!HD^po29h9)F_H)&&bY)7/^L)N;HHUUNFkrD>X7W/%^%# snmp-agent sys-info version all snmp-agent target-host trap-hostname esight-Server01 address 192.168.8.100 udp-port 161 trap-paramsname Pokhara#123 snmp-agent trap source LoopBack0 snmp-agent trap enable snmp-agent extend error-code enable snmp-agent

    ssh client 10.0.1.2 assign ecc-key 10.0.1.2 ssh client 10.0.1.4 assign ecc-key 10.0.1.4 ssh client first-time enable stelnet server enable

    http secure-server ssl-policy default_policy http secure-server enable http server permit interface Meth0/0/0

    fib regularly-refresh disable

    user-interface con 0 authentication-mode aaa user-interface vty 0 authentication-mode aaa user privilege level 15 protocol inbound ssh user-interface vty 1 4 protocol inbound ssh

    wlan ac traffic-profile name default security-profile name default security-profile name default-wds security wpa2 psk pass-phrase %^%#,g”‘.jBBZWnyJqGKn0u5X(\lGc;dMTu{*c%[’;l@%^%# aes ssid-profile name default vap-profile name default wds-profile name default regulatory-domain-profile name default air-scan-profile name default rrm-profile name default radio-2g-profile name default radio-5g-profile name default wids-spoof-profile name default wids-profile name default ap-system-profile name default port-link-profile name default wired-port-profile name default ap-group name default

    dot1x-access-profile name dot1x_access_profile

    mac-access-profile name mac_access_profile

    ntp-service unicast-server 192.168.13.100

    ops

    autostart

    secelog

    ms-channel

    return

  2. Assistant

    The configuration above is for the Huawei AR6280 Router and consists of multiple lines of configuration commands. Below is a line-by-line explanation of each command.

    1. sysname pokhara-CR-AR6280-01 - This command sets the system name of the router as "pokhara-CR-AR6280-01".

    2. board add 0/3 4ES2G-S, board add 0/4 4ES2G-S - These commands add two interface modules to the router's chassis slots, which are identified as slots 0/3 and 0/4, respectively. The modules are 4ES2G-S, which have four Gigabit Ethernet ports and two 1000BASE-X (SFP) ports each.

    3. drop illegal-mac alarm - This command enables the router to send an alarm message when an illegal MAC address is detected.

    4. clock timezone Asia/Kathmandu add 05:45:00 - This command sets the router's time zone to Asia/Kathmandu and adds an offset of 05 hours and 45 minutes to the Coordinated Universal Time (UTC).

    5. ipv6 - This command enables the IPv6 protocol on the router.

    6. vlan batch 2 to 2000 - This command creates VLANs with IDs 2 to 2000.

    7. authentication-profile name default_authen_profile, authentication-profile name dot1x_authen_profile, authentication-profile name dot1xmac_authen_profile, authentication-profile name mac_authen_profile, authentication-profile name multi_authen_profile, authentication-profile name portal_authen_profile - These commands create different authentication profiles for various authentication methods such as 802.1x, MAC, and portal-based authentication.

    8. lldp enable - This command enables the Link Layer Discovery Protocol (LLDP), which allows network devices to exchange information about their identities, capabilities, and neighbors.

    9. dhcp enable - This command enables the Dynamic Host Configuration Protocol (DHCP) service on the router for automatic IP address assignment.

    10. ecc peer-public-key 10.0.1.4 encoding-type der and ecc peer-public-key 10.0.1.2 encoding-type der - These two commands add the public keys of the two routers with IP addresses 10.0.1.4 and 10.0.1.2, respectively, for secure communication using elliptic curve cryptography (ECC).

    11. radius-server template default - This command creates a RADIUS template with default settings for user authentication and authorization.

    12. pki realm default - This command creates a Public Key Infrastructure (PKI) realm with default settings.

    13. ssl policy default_policy type server - This command creates an SSL policy with the name default_policy for the router's server mode.

    14. ike proposal default - This command creates an Internet Key Exchange (IKE) proposal with default settings for VPN connections.

    15. free-rule-template name default_free_rule - This command creates a free rule template named default_free_rule.

    16. portal-access-profile name portal_access_profile - This command creates a portal access profile named portal_access_profile.

    17. ip pool test gateway-list 192.168.24.1 network 192.168.24.0 mask 255.255.252.0 - This command creates an IP address pool named test, sets the default gateway IP address to 192.168.24.1, and assigns a network IP address and subnet mask to the pool.

    18. aaa authentication-scheme default and aaa authentication-scheme radius - These commands create authentication schemes named default and radius, respectively, for the router's AAA (authentication, authorization, and accounting) services.

    19. aaa local-aaa-user password policy administrator - This command creates a local user named administrator with a password policy for the AAA services.

    20. firewall zone Local - This command creates a firewall zone named Local for the router's interfaces.

    21-35. These commands create interfaces on the router for different purposes such as serving different VLANs, connecting to other devices, wireless LAN configuration, etc. Each interface is given a name, description, IP address, and other settings as required.

    1. snmp-agent local-engineid 800007DB03A400E2ADE038 - This command sets the SNMP (Simple Network Management Protocol) agent's local engine ID on the router.

    37-39. These commands enable SNMP on the router, set community strings for read and write access, and set a target trap host for SNMP traps.

    40-43. These commands enable SSH on the router, assign ECC keys to remote servers, and enable the first-time connection prompt for SSH clients.

    1. stelnet server enable - This command enables Secure Telnet (STelnet) on the router.

    45-47. These commands enable and configure the HTTPS service on the router, set an SSL policy for HTTPS, and allow HTTP service on a specific interface.

    1. fib regularly-refresh disable - This command disables the router's IP forwarding information base (FIB) regular refresh.

    2. user-interface con 0, user-interface vty 0, user-interface vty 1 4 - These commands configure the console and virtual terminal interfaces for user access and authentication.

    50-53. These commands configure the wireless LAN on the router, including traffic profiles, security profiles, regulatory domain profiles, and more.

    1. dot1x-access-profile name dot1x_access_profile - This command creates a dot1x access profile named dot1x_access_profile.

    2. mac-access-profile name mac_access_profile - This command creates a MAC access profile named mac_access_profile.

    3. ntp-service unicast-server 192.168.13.100 - This command configures the router's NTP (Network Time Protocol) server with the IP address 192.168.13.100.

    4. ops - This command enables the optional operational software (OPS) on the router.

    5. autostart - This command enables the router to automatically boot upon power-up.

    6. secelog - This command enables the security log function on the router.

    7. ms-channel - This command enables multicast channel configuration on the router.