linux i2c异步实现方式
- User
linux i2c异步实现方式
- Assistant
Linux提供了i2c-dev驱动来实现i2c接口的访问,i2c-dev驱动提供了一组ioctl接口用于异步访问i2c设备。下面是异步实现方式的具体步骤:
- 打开i2c-dev接口
int fd = open("/dev/i2c-1", O_RDWR); if (fd < 0) { perror("open"); return -1; }- 设置i2c设备地址
if (ioctl(fd, I2C_SLAVE, address) < 0) { perror("ioctl"); return -1; }- 初始化i2c_msg结构体
i2c_msg结构体描述了一次i2c传输的信息,包括读写方向、数据长度和数据缓冲区等。在异步访问中,需要使用i2c_rdwr_ioctl_data结构体来存储多个i2c_msg结构体,然后通过ioctl函数传递给i2c-dev驱动。
i2c_msg msgs[2]; msgs[0].addr = address; msgs[0].flags = 0; // write msgs[0].len = sizeof(write_buf); msgs[0].buf = write_buf; msgs[1].addr = address; msgs[1].flags = I2C_M_RD; // read msgs[1].len = sizeof(read_buf); msgs[1].buf = read_buf; i2c_rdwr_ioctl_data data; data.msgs = msgs; data.nmsgs = 2;- 发送数据
if (ioctl(fd, I2C_RDWR, &data) < 0) { perror("ioctl"); return -1; }- 关闭i2c-dev接口
close(fd);以上就是通过i2c-dev实现异步i2c访问的具体步骤。当然还可以使用其他i2c库函数,比如使用i2c_transfer函数实现同步i2c访问。
- User
linux i2c 有异步接口么
- Assistant
是的,Linux提供了i2c-dev驱动来实现i2c接口的访问,其中包括异步接口。i2c-dev驱动提供了ioctl接口用于异步访问i2c设备。
在i2c-dev驱动中,异步I2C访问通过i2c_rdwr_ioctl_data结构体来实现。i2c_rdwr_ioctl_data结构体包含一个i2c_msg类型的指针数组msgs和一个表示指针数组长度的整数nmsgs。
下面是一个简单的异步访问i2c设备的示例:
#include <linux/i2c-dev.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <stdio.h> #include <string.h> #define I2C_SLAVE_ADDRESS 0x27 int main(int argc, char *argv[]) { int i, fd; char buf[10]; struct i2c_rdwr_ioctl_data i2c_data; struct i2c_msg i2c_msg[2]; fd = open("/dev/i2c-1", O_RDWR); if (fd < 0) { perror("open"); return -1; } if (ioctl(fd, I2C_SLAVE, I2C_SLAVE_ADDRESS) < 0) { perror("ioctl"); return -1; } memset(buf, 0, sizeof(buf)); i2c_msg[0].addr = I2C_SLAVE_ADDRESS; i2c_msg[0].flags = 0; /* write */ i2c_msg[0].len = 1; i2c_msg[0].buf = buf; i2c_msg[1].addr = I2C_SLAVE_ADDRESS; i2c_msg[1].flags = I2C_M_RD; /* read */ i2c_msg[1].len = 3; i2c_msg[1].buf = buf; i2c_data.msgs = i2c_msg; i2c_data.nmsgs = 2; if (ioctl(fd, I2C_RDWR, &i2c_data) < 0) { perror("ioctl"); return -1; } for (i = 0; i < 3; i++) { printf("0x%x ", buf[i]); } printf("\n"); close(fd); return 0; }在上述示例中,通过open函数打开i2c设备文件,然后使用ioctl函数将i2c设备地址设置为0x27。我们使用i2c_msg结构体描述一次i2c访问,使用i2c_rdwr_ioctl_data结构体通过ictl实现异步i2c访问。最后,通过I2C_RDWR参数调用ioctl函数实现异步i2c访问。
- User
wait_for_completion_timeout
- Assistant
wait_for_completion_timeout 是 Linux 内核中的一个同步原子操作,它的作用是等待一个 completion 变量被唤醒并结束。这个功能可以用于实现同步操作,让一个线程等待另一个线程执行某个操作并发送信号,然后再继续执行。
wait_for_completion_timeout 主要有以下参数:
- completion:要等待的 completion 变量
- timeout:等待的超时时间,单位是 jiffies,如果为 0 表示无限等待
- 返回值:0 表示等待时间已经超时,-1 表示被唤醒。
下面是一个示例,通过 wait_for_completion_timeout 实现等待一个 work 结构体被执行完成的过程:
#include <linux/kernel.h> #include <linux/module.h> #include <linux/workqueue.h> #include <linux/slab.h> static struct workqueue_struct *example_wq; static struct work_struct example_work; static struct completion example_completion; static void example_wq_function(struct work_struct *work) { /* 这里做一些需要花费一定时间的计算工作 */ msleep(1000); /* 等待完成变量 */ complete(&example_completion); } static int __init example_wq_init(void) { example_wq = create_singlethread_workqueue("example_wq"); if (!example_wq) return -ENOMEM; /* 初始化 work 和完成变量 */ INIT_WORK(&example_work, example_wq_function); init_completion(&example_completion); /* 在工作队列中安排工作 */ queue_work(example_wq, &example_work); /* 等待完成变量,超过 1 秒则超时 */ if (wait_for_completion_timeout(&example_completion, HZ)) { pr_info("example work queue example_work complete\n"); } else { pr_err("example work queue example_work timeout\n"); } return 0; } static void __exit example_wq_exit(void) { /* 删除工作队列和完成变量 */ flush_workqueue(example_wq); destroy_workqueue(example_wq); destroy_completion(&example_completion); } module_init(example_wq_init); module_exit(example_wq_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Example wait for completion timeout module"); MODULE_AUTHOR("Jiangnan Liu");在上述示例中,我们创建一个工作队列 example_wq,并在其中安排了一个工作,该工作会在工作队列中执行 example_wq_function 函数。在 example_wq_init 函数中,我们使用 wait_for_completion_timeout 函数等待该工作完成,并在完成后输出相应的信息。如果等待超过 1 秒,则认为工作超时。最后在 example_wq_exit 函数中,我们销毁工作队列和完成变量。
需要注意的是,wait_for_completion_timeout 函数调用本身会占用 CPU 资源,因此在使用时要根据实际情况谨慎设置等待超时时间。
- User
linux i2c 有异步传输接口么
- Assistant
是的,Linux提供了i2c-dev驱动来实现i2c接口的访问,其中包括异步i2c传输接口。i2c-dev驱动提供i2c_transfer函数来实现i2c传输,该函数可以使用异步或同步模式操作。在传输数据时,需要使用i2c_msg结构体描述i2c消息,然后将这些结构体作为数组传递给该函数。
下面是一个异步i2c传输的示例:
#include <linux/i2c-dev.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <stdio.h> #include <string.h> #define I2C_SLAVE_ADDRESS 0x27 int main(int argc, char *argv[]) { int fd, ret; char write_buf[2] = {0x00, 0x01}; char read_buf[2] = {}; struct i2c_msg msgs[2]; struct i2c_rdwr_ioctl_data data; fd = open("/dev/i2c-1", O_RDWR); if (fd < 0) { perror("open"); return -1; } if (ioctl(fd, I2C_SLAVE, I2C_SLAVE_ADDRESS) < 0) { perror("ioctl"); return -1; } msgs[0].addr = I2C_SLAVE_ADDRESS; msgs[0].flags = 0; /* write */ msgs[0].len = sizeof(write_buf); msgs[0].buf = write_buf; msgs[1].addr = I2C_SLAVE_ADDRESS; msgs[1].flags = I2C_M_RD; /* read */ msgs[1].len = sizeof(read_buf); msgs[1].buf = read_buf; data.msgs = msgs; data.nmsgs = 2; ret = ioctl(fd, I2C_RDWR, &data); if (ret < 0) { perror("ioctl"); return -1; } printf("read data: %x %x\n", read_buf[0], read_buf[1]); close(fd); return 0; }在上述示例中,我们使用ioctl函数将i2c设备地址设置为0x27,然后使用i2c_msg结构体描述一次i2c访问,包括写入一个2字节数据和读取2字节返回数据。然后使用i2c_rdwr_ioctl_data结构体通过ioctl函数异步传输数据,最后输出读取到的数据。
需要注意的是,在使用异步i2c传输接口时,需要处理异步传输完成事件,一般可以使用等待队列或completion结构体等方式来实现。具体内容可以参考Linux内核文档或相关资料。
- User
linux i2c设置超时时间为什么以10ms为单位
- Assistant
在Linux内核中,i2c-dev驱动由于历史原因,使用的是10毫秒(ms)为单位的超时时间。这个单位的设定与当初i2c-dev驱动的设计时的考虑有关。
设备驱动中需要设置的超时时间一般由硬件的响应速度、处理能力和数据传输速率等因素决定。i2c 总线的时序比较复杂,不同的设备可能会有不同的响应时间。在i2c-dev驱动设计时,使用10ms作为超时时间的单位,是根据i2c设备的响应时间考虑而来的。实际上,对于绝大多数应用场景,10ms作为超时时间已经足够了。
当然,对于一些特殊的应用场景,可能会需要更细粒度的超时时间设置,这时可以通过修改i2c-dev驱动的源代码来实现。通常情况下,也可以将这个问题留给上层的应用程序来处理,由应用程序根据实际需要设置超时时间的精度。
- User
linux 中i2c的异步传输接口和同步传输接口是?
- Assistant
在 Linux 操作系统中,I2C 的异步和同步传输接口如下:
- I2C 同步传输接口
i2c_transfer 函数是 I2C 的同步传输接口,该函数通过传入一个 i2c_msg 结构体数组来实现 I2C 数据传输。在函数参数中可以指定 I2C 设备地址,读写操作等参数,函数返回值用于表示传输是否成功。使用 i2c_transfer 函数时,当前线程会在函数返回前阻塞等待数据传输完成。
以下是一个 i2c_transfer 接口的使用示例:
#include <linux/i2c-dev.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <stdio.h> #include <string.h> #define I2C_SLAVE_ADDRESS 0x27 int main(int argc, char *argv[]) { int fd, ret; char write_buf[2] = {0x00, 0x01}; char read_buf[2] = {}; struct i2c_msg msgs[2]; fd = open("/dev/i2c-1", O_RDWR); if (fd < 0) { perror("open"); return -1; } if (ioctl(fd, I2C_SLAVE, I2C_SLAVE_ADDRESS) < 0) { perror("ioctl"); return -1; } msgs[0].addr = I2C_SLAVE_ADDRESS; msgs[0].flags = 0; /* write */ msgs[0].len = sizeof(write_buf); msgs[0].buf = write_buf; msgs[1].addr = I2C_SLAVE_ADDRESS; msgs[1].flags = I2C_M_RD; /* read */ msgs[1].len = sizeof(read_buf); msgs[1].buf = read_buf; ret = i2c_transfer(fd, msgs, 2); if (ret < 0) { perror("i2c_transfer"); return -1; } printf("read data: %x %x\n", read_buf[0], read_buf[1]); close(fd); return 0; }- I2C 异步传输接口
i2c_transfer 和 i2c_rdwr 函数结合使用,可以实现 I2C 的异步传输,i2c_rdwr 函数将 I2C 的数据传输和传输的时间进行异步处理。i2c_rdwr 函数通过传入一个 i2c_rdwr_ioctl_data 结构体实现 I2C 数据传输。该结构体包含多个 i2c_msg 结构体,用于描述 I2C 的数据传输操作。
i2c_rdwr 函数返回值用于表示传输是否初始化成功,分为以下情况:
- 返回传输的次数,表示传输已经发起,但是传输尚未完成
- 返回 0 表示传输已经完成
- 返回值小于 0 表示传输或初始化失败。
使用 i2c_rdwr 函数进行异步传输时,可以使用 wait_for_completion_timeout 函数等待传输完成事件,同时可以使用 completion 结构体来等待异步传输操作完成。
以下是一个 i2c_rdwr 接口的使用示例:
#include <linux/i2c-dev.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <linux/wait.h> #include <stdio.h> #include <string.h> #define I2C_SLAVE_ADDRESS 0x27 int main(int argc, char *argv[]) { int fd, ret; u8 write_buf[2] = {0x00, 0x01}; u8 read_buf[2] = {}; struct i2c_msg msgs[2]; struct i2c_rdwr_ioctl_data data; DECLARE_WAIT_QUEUE_HEAD(wait); fd = open("/dev/i2c-1", O_RDWR); if (fd < 0) { perror("open"); return -1; } if (ioctl(fd, I2C_SLAVE, I2C_SLAVE_ADDRESS) < 0) { perror("ioctl"); return -1; } msgs[0].addr = I2C_SLAVE_ADDRESS; msgs[0].len = sizeof(write_buf); msgs[0].buf = write_buf; msgs[1].addr = I2C_SLAVE_ADDRESS; msgs[1].flags = I2C_M_RD; /* read */ msgs[1].len = sizeof(read_buf); msgs[1].buf = read_buf; data.msgs = msgs; data.nmsgs = 2; ret = i2c_rdwr(fd, &data); if (ret != 2) { perror("i2c_rdwr"); return -1; } /* 等待传输完成 */ interruptible_sleep_on_timeout(&wait, HZ / 10);
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.