Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0301· OpenAIAi2 WildChat-4.8M (AI2)

hi

  1. User

    hi

  2. Assistant

    Hello! How can I assist you today?

  3. User

    i have a code in c programming language for stm32f103c6 microcontroller. can you explain to me what it does?

  4. Assistant

    Sure! Please share the code and I will be happy to explain it to you.

  5. User

    #include "STM32F10x.h"

    //#include <stm32f103x6.h>

    #define SampleNumber 100 // INIT functions ------------------------ void GPIOInit(void); void gpioIntInit(void); void spi1Init(void); void timer2Init(void); void GenaralSramSetting(void); // TRANSMITE DATA functions --------------- uint16_t RamReader(void); void RamWriter(uint16_t d); void DAC(uint16_t d); uint16_t ADC (void); //GLOBAL data ----------------------------- uint16_t Counter=0; uint16_t address=0x0000; uint8_t flag1=1; //Main function ------------------------------- int main(){

    GPIOInit();
    gpioIntInit();
    spi1Init();
    timer2Init();
    GenaralSramSetting();
    
    while(1){
    }
    

    } //GPIO AND GENERAL SETTING------------------------------------------------- void GPIOInit(void){ RCC->APB2ENR = RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN ; RCC->APB2RSTR |= RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST; RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST); GPIOA->CRL = 0xa4a42224 ; //a5, a7 : spi1, a1, a2, a3 : output (NCS) GPIOA->ODR |= 0x00e ; GPIOB->CRL = 0x22224444 ; //b1: push button GPIOB->CRH = 0x22222222 ;

    }
    

    //-------------------------------------------------------------- void gpioIntInit(void){

    RCC->APB2ENR   |=   0x00000001 ;
    AFIO->EXTICR[0] =0x0010;				//interrupt from port B pin 1
    EXTI->IMR   = (1<<1);					//PB1 unmasked
    //EXTI->EMR   = 0<<1;		     	//no event
    EXTI->FTSR  = (1<<1);					//falling edge interrupt
    //EXTI->RTSR  = 0<<1;	//rising edge(no)
    EXTI->PR    = (1<<1);					//clear pending interrupts
    //EXTI->SWIER = 0<<1;		//no software interrupt
    NVIC_EnableIRQ(EXTI1_IRQn);
    

    } //--------------------------------------------------------------- void EXTI1_IRQHandler(void){ EXTI->PR = (1<<1); EXTI->IMR = ~(1<<1); //Pb1 masked flag1 = 0; address = 0; }

    //---------------------------------------------------------------

    //------------------------------------------------------------------ void timer2Init(void){ RCC->APB1RSTR |= RCC_APB1RSTR_TIM2RST; RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST); RCC->APB1ENR |= RCC_APB1ENR_TIM2EN; // 1 kHz--------------------------------------- TIM2->PSC = (40-1); //prescaler TIM2->ARR = (200-1); //auto-reload //--------------------------------------------- TIM2->DIER = 0x0001; // update intrupt enable TIM2->CR1 = 0x0001; //enable

    NVIC_EnableIRQ(TIM2_IRQn);
    

    } //--------------------------------------------------------------- void TIM2_IRQHandler(void){ TIM2->SR &= ~0x00000001; // reset the flag // send data as normal satae ------ if(flag1==1){ DAC(RamReader()); } //----------------------------------- // recieve data after intrupt ------ else{ RamWriter(ADC()); Counter++; if(Counter==SampleNumber){ flag1=1; Counter=0; address=0; EXTI->IMR = (1<<1); } } //----------------------------------- } // ---------------------------------------------------------- void GenaralSramSetting(void){ GPIOB->ODR |= (0x0010); GPIOB->ODR &= ~(0x0010); SPI1->DR = 0x01; //Write STATUS register while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); // sr-> flags SPI1->DR = 0x40; //Sequential mode 0100_0000 while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); // sr-> flags GPIOB->ODR |= (0x0010); } //------------------------------------------------------------------------------------------- void spi1Init(void){ RCC->APB2RSTR |= RCC_APB2RSTR_SPI1RST; RCC->APB2RSTR &= ~RCC_APB2RSTR_SPI1RST; RCC->APB2ENR |= RCC_APB2ENR_SPI1EN; // faal sazi clk

    SPI1->CR1 = 0x0044;	//0100_0100
    // bit 6 : spi anable 
    // bit 2 : mster selection 
    SPI1->CR2 = 0x0004;  // 0000 0100
    //1: SS output is enabled in master mode and when the cell is enabled. The cell cannot work
    
    }
    

    //--------------------------------------------------------------------- uint16_t ADC(void){ // meghdar motale shode ra barmigardanad uint16_t a; GPIOA->ODR &= ~(0x0002); // a1 = 1 faal kardan spi analog ti dig SPI1->DR = 0x06; while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); SPI1->DR = 0x40; while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); // 4 bit vazn bala a=((SPI1->DR & 0x000f)<<8); SPI1->DR = 0x00; while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); // 8 bit vazn paeen a |= (SPI1->DR & 0x00ff); GPIOA->ODR |= (0x0002); return(a); } //-------------------------------------------------------------------- void DAC(uint16_t d){ uint16_t s; s = (1<<12) | (d&0x0fff); //Gain=2, Shutdown=0 // 0001(d) GPIOA->ODR &= ~(0x0008); // 0 kardan ss
    SPI1->DR = ((s>>8)&0xff); // 4 bit ersal moshvad while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); SPI1->DR =(s&0xff); // 8 bit ersal while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); SPI1->DR; // baray etmanan GPIOA->ODR |= (0x0008); // 1 kardan ss } //---------------------------------------------------------------------- uint16_t RamReader(void){

    uint16_t r;
    // REQUUEST ---------------------------------------------------------
    GPIOB->ODR &= ~(0x0010);  // b4 ss sram 
    SPI1->DR = 0x03;				//READ instruction
    while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY);
    SPI1->DR; // baray ok shodan flag 
    
    SPI1->DR = ((address>>8) & 0xff);		//Address(first 8 bits)
    while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY);
    SPI1->DR;
    SPI1->DR = (address & 0xff);	//Address(last 8 bits)
    while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY);
    
    //---------------------------------------------------------------------
    
    //RECIEVE --------------------------------------------------------------
    SPI1->DR;
    SPI1->DR = 0x00;
    while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY);
    r = (SPI1->DR)<<4; // 8  BIT vasn bala 
    SPI1->DR = 0x00;
    while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY);
    r |= (SPI1->DR)>>4;
    GPIOB->ODR |= (0x0010); // 4 bit vazn paeen 
    address = address + 2;  // chon har seri 2 address pish mire 
    if(address>=2*SampleNumber){ // age be enteha reside bod az aavla 
    	address = 0;
    }
    return(r);
    

    } //------------------------------------------------------------------------------- void RamWriter(uint16_t d){ //REQUEST------------------------------------------------------------- GPIOB->ODR &= ~(0x0010); SPI1->DR = 0x02; //WRITE instruction while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); SPI1->DR; SPI1->DR = ((address>>8) & 0xff); //Address(first 8 bits) while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); SPI1->DR; SPI1->DR = (address & 0xff); //Address(last 8 bits) while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); //------------------------------------------------------------------- //SEND --------------------------------------------------------------- SPI1->DR; SPI1->DR = ((d>>4) & 0xff); while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); SPI1->DR; SPI1->DR = ((d&0xf)<<4); while((SPI1->SR & SPI_SR_BSY) == SPI_SR_BSY); SPI1->DR; GPIOB->ODR |= (0x0010); address = address + 2; } //------------------------------------------------------------------------

  6. Assistant

    This code is written in C programming language and is meant to be run on the STM32F103C6 microcontroller. Here's a brief description of the code:

    The code contains several functions that are used to initialize various components of the microcontroller like GPIO, SPI1, and timer 2. These functions are called in the main function, which runs an infinite loop.

    The main function waits for an interrupt to occur, specifically on port B pin 1. When this interrupt occurs, the EXTI1_IRQHandler function is called. In this function, the interrupt is cleared, the pin is masked, and global variables are set.

    The timer2Init function initializes Timer 2, which generates an interrupt at 1kHz. When this interrupt occurs, it checks the value of flag1. If the flag is set, a reading from the SRAM is taken and sent through the DAC. If the flag is not set, data is written to the SRAM and the address is incremented. This is done until the specified sample number is reached, after which the flag is set and the pin is unmasked, waiting for another interrupt.

    The RamWriter and RamReader functions are used to write and read data from the SRAM. The DAC and ADC functions are used to output voltage and read voltage from an analog sensor, respectively.

    Overall, the code is controlling the reading and writing of data to an SRAM, as well as reading and outputting voltage from an analog sensor.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.