Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0301· OpenAIAi2 WildChat-4.8M (AI2)

В этот код хочу добавить свой объект в формате gltf . как это сделать? код: setMesh() {…

  1. User

    В этот код хочу добавить свой объект в формате gltf . как это сделать? код: setMesh() { const geometry = new THREE.BufferGeometry(); const firstPos = this.getGeometryPosition(new THREE.SphereBufferGeometry(1, 32, 32).toNonIndexed()); const secPos = this.getGeometryPosition(new THREE.TorusBufferGeometry(0.7, 0.3, 32, 32).toNonIndexed()); const thirdPos = this.getGeometryPosition(new THREE.TorusKnotBufferGeometry(0.6, 0.25, 300, 20, 6, 10).toNonIndexed()); const forthPos = this.getGeometryPosition(new THREE.CylinderBufferGeometry(1, 1, 1, 32, 32).toNonIndexed()); const fivePos = this.getGeometryPosition(new THREE.IcosahedronBufferGeometry(1.1, 0).toNonIndexed()); const material = new THREE.RawShaderMaterial({ vertexShader: ` attribute vec3 position; attribute vec3 secPosition; attribute vec3 thirdPosition; attribute vec3 forthPosition; attribute vec3 fivePosition; uniform float u_sec1; uniform float u_sec2; uniform float u_sec3; uniform float u_sec4; uniform mat4 modelViewMatrix; uniform mat4 projectionMatrix;

                          void main() {
                           vec3 toTorus = mix(position, secPosition, u_sec1);
                           vec3 toTorusKnot = mix(toTorus, thirdPosition, u_sec2);
                           vec3 toCylinder = mix(toTorusKnot, forthPosition, u_sec3);
                           vec3 finalPos = mix(toCylinder, fivePosition, u_sec4);
                    
                           gl_Position = projectionMatrix * modelViewMatrix * vec4(finalPos, 1.0 );
                           gl_PointSize = 3.0;
                          }`,
            fragmentShader: `
                              precision mediump float;
                              void main() {
                                  vec2 temp = gl_PointCoord - vec2(0.5);
                                  float f = dot(temp, temp);
                                  if (f > 0.25 ) {
                                      discard;
                                  }
                                  gl_FragColor = vec4(1.0, 1.0, 1.0, 1.0);
                              }`,
            uniforms: {
                u_sec1: { type: "f", value: 0.0 },
                u_sec2: { type: "f", value: 0.0 },
            },
            transparent: true,
            blending: THREE.AdditiveBlending,
        });
    
        geometry.setAttribute("position", new THREE.BufferAttribute(firstPos, 3));
        geometry.setAttribute("secPosition", new THREE.BufferAttribute(secPos, 3));
        geometry.setAttribute("thirdPosition", new THREE.BufferAttribute(thirdPos, 3));
        geometry.setAttribute("forthPosition", new THREE.BufferAttribute(forthPos, 3));
        geometry.setAttribute("fivePosition",new THREE.BufferAttribute(fivePos, 3));
    
        this.mesh = new THREE.Points(geometry, material);
    
        this.group = new THREE.Group();
        this.group.add(this.mesh);
    
        this.stage.scene.add(this.group);
    }
    
  2. Assistant

    Для добавления объекта в формате gltf в код нужно использовать загрузчик GLTFLoader из библиотеки three.js. Для этого нужно выполнить следующие шаги:

    1. Загрузить GLTFLoader:
    import { GLTFLoader } from 'three/examples/jsm/loaders/GLTFLoader';
    
    1. Использовать GLTFLoader для загрузки файла в формате gltf:
    const loader = new GLTFLoader();
    loader.load(
      'path/to/your/gltf/file.gltf',
      (gltf) => {
        // Действия после загрузки объекта
      },
      (xhr) => {
        // Отслеживание прогресса загрузки
        console.log((xhr.loaded / xhr.total) * 100 + '% loaded');
      },
      (error) => {
        // Обработка ошибок загрузки
        console.error('An error happened', error);
      }
    );
    
    1. После успешной загрузки можно получить нужный объект и добавить его на сцену:
    const object = gltf.scene.children[0];
    this.group.add(object);
    

    Обращаем внимание, что в зависимости от того, какой объект вы загрузили, может быть необходимо произвести его масштабирование, поворот или сдвиг.

  3. User

    совмести код с тем, что я написал выше

  4. Assistant

    Код, который загружает gltf-файл и добавляет его на сцену, может быть добавлен после создания сферы, тора, тороидального узла и других геометрий. Вот так может выглядеть готовый код:

    import { GLTFLoader } from 'three/examples/jsm/loaders/GLTFLoader';
    
    setMesh() {
      const geometry = new THREE.BufferGeometry();
      const firstPos = this.getGeometryPosition(new THREE.SphereBufferGeometry(1, 32, 32).toNonIndexed());
      const secPos = this.getGeometryPosition(new THREE.TorusBufferGeometry(0.7, 0.3, 32, 32).toNonIndexed());
      const thirdPos = this.getGeometryPosition(new THREE.TorusKnotBufferGeometry(0.6, 0.25, 300, 20, 6, 10).toNonIndexed());
      const forthPos = this.getGeometryPosition(new THREE.CylinderBufferGeometry(1, 1, 1, 32, 32).toNonIndexed());
      const fivePos = this.getGeometryPosition(new THREE.IcosahedronBufferGeometry(1.1, 0).toNonIndexed());
        
      const loader = new GLTFLoader();
      loader.load(
        'path/to/your/gltf/file.gltf',
        (gltf) => {
          const object = gltf.scene.children[0];
          object.scale.set(0.5, 0.5, 0.5); // опционально: изменяем размер загруженного объекта
          object.position.set(1, 1, 1); // опционально: изменяем положение загруженного объекта
          this.group.add(object);
        },
        (xhr) => {
          console.log((xhr.loaded / xhr.total) * 100 + '% loaded');
        },
        (error) => {
          console.error('An error happened', error);
        }
      );
    
      const material = new THREE.RawShaderMaterial({
        vertexShader: `
            attribute vec3 position;
            attribute vec3 secPosition;
            attribute vec3 thirdPosition;
            attribute vec3 forthPosition;
            attribute vec3 fivePosition;
            uniform float u_sec1;
            uniform float u_sec2;
            uniform float u_sec3;
            uniform float u_sec4;
            uniform mat4 modelViewMatrix;
            uniform mat4 projectionMatrix;
            
            void main() {
                vec3 toTorus = mix(position, secPosition, u_sec1);
                vec3 toTorusKnot = mix(toTorus, thirdPosition, u_sec2);
                vec3 toCylinder = mix(toTorusKnot, forthPosition, u_sec3);
                vec3 finalPos = mix(toCylinder, fivePosition, u_sec4);
            
                gl_Position = projectionMatrix * modelViewMatrix * vec4(finalPos, 1.0 );
                gl_PointSize = 3.0;
              }`,
        fragmentShader: `
            precision mediump float;
            void main() {
                vec2 temp = gl_PointCoord - vec2(0.5);
                float f = dot(temp, temp);
                if (f > 0.25 ) {
                    discard;
                }
                gl_FragColor = vec4(1.0, 1.0, 1.0, 1.0);
            }`,
        uniforms: {
            u_sec1: { type: "f", value: 0.0 },
            u_sec2: { type: "f", value: 0.0 },
        },
        transparent: true,
        blending: THREE.AdditiveBlending,
      });
    
      geometry.setAttribute("position", new THREE.BufferAttribute(firstPos, 3));
      geometry.setAttribute("secPosition", new THREE.BufferAttribute(secPos, 3));
      geometry.setAttribute("thirdPosition", new THREE.BufferAttribute(thirdPos, 3));
      geometry.setAttribute("forthPosition", new THREE.BufferAttribute(forthPos, 3));
      geometry.setAttribute("fivePosition",new THREE.BufferAttribute(fivePos, 3));
    
      this.mesh = new THREE.Points(geometry, material);
    
      this.group = new THREE.Group();
      this.group.add(this.mesh);
    
      this.stage.scene.add(this.group);
    }
    

    Замените 'path/to/your/gltf/file.gltf' на путь к вашему файлу gltf, который вы хотите загрузить. Если файл находится на том же сервере, что и ваш скрипт, то вам не нужно указывать полный путь, а просто имя файла будет достаточно.

    Обратите внимание, что после скачивания объекта вы можете использовать любые операции трансформации (изменение размера, положения и т.д.), чтобы разместить объект в нужном месте на сцене.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.