请帮我将以下中文内容翻译为英文并润色:随着我国经济迅猛发展和国民生活水平显著提升,餐厨泔水排放量也与日俱增。若对其处理不当,将对环境卫生和公众健康带来一系列威胁。许多泔水处理设备…
- User
请帮我将以下中文内容翻译为英文并润色:随着我国经济迅猛发展和国民生活水平显著提升,餐厨泔水排放量也与日俱增。若对其处理不当,将对环境卫生和公众健康带来一系列威胁。许多泔水处理设备因此涌现。但经过调研发现这些设备往往忽视了分离膏状物排出装置的设计。本选题针对泔水回收,拟设计一种用于中型泔水处理机的泔水分离物自动排出及回流装置,以避免分离物长期未排出或未能排进回收容器,对设备或者环境产生负面影响。同时,该设备还应具备残留物清洗等功能,以减少污染排放并降低设备维护成本。 本文首先通过对国内外泔水处理设备发展现状进行调研,了解分离物物理特点。接着,对装置的总体设计方案进行比较分析,采用倾斜式螺旋输送方式抬升排出膏状物,并在料槽增加了水管接口以满足清洗回流功能;设计三级滤水器对分离水二次过滤以达到清洗效果。然后运用所学知识对排出装置中的螺旋轴、圆筒料槽、驱动轴和从动轴等零件进行了设计。并且对电机、轴承等成品件标准件进行了选型、校核。对滤水器结构进行分析和设计。最后使用三维建模软件SOLIDWORKS对所有零部件进行建模、装配、工程图绘制和静力学仿真,验证了各机构的可行性。 本设计将螺旋输送应用到泔水处理设备分离物的抬升排出功能并结合滤水器,有效提升了泔水处理设备整体的工作效率,减少环境污染,对分离水二次利用满足清洗功能,节省人力物力。对泔水处理设备排出装置设计有一定的参考价值。
- Assistant
With the rapid development of China's economy and the significant improvement of the national standard of living, the amount of restaurant and kitchen wastewater discharge is increasing day by day. If not properly handled, it will bring a series of threats to the environment and public health. Thus, many wastewater treatment devices have emerged. However, research has found that these devices often overlook the design of the separation paste discharge device. Therefore, this project aims to design an automatic separation paste discharge and reflux device for medium-sized wastewater treatment machines to avoid the negative effects of long-term accumulation of separation paste, untreated separation paste, or inability to be discharged into the recycling container. At the same time, the equipment should also have residual cleaning functions to reduce pollution emissions and reduce maintenance costs.
Firstly, the research investigates the current status of domestic and foreign wastewater treatment equipment and the physical characteristics of the separation paste. Then, a comparative analysis of the overall design scheme of the device is conducted and a inclined screw conveyor is adopted to lift and discharge the paste with a water pipe interface added to the tank to meet the cleaning and reflux function. A three-stage filter is designed to achieve the cleansing effect of the secondary filtration of the separation water. Then, engineering design principles are applied to the design of various components of the discharge device, such as the spiral shaft, barrel, driving shaft, and driven shaft. The specifications and verification of finished components such as electric motors and bearings are completed. The structure of the filter is analyzed and designed. Finally, the 3D modeling software SOLIDWORKS is used to model, assemble, draw engineering diagrams, and simulate statics for all components to verify the feasibility of each mechanism.
This design applies the screw conveyor to the lifting and separating paste discharge function of the wastewater treatment device and combines it with a filter to effectively improve the overall efficiency of the wastewater treatment device, reduce environmental pollution, reuse separated water for cleaning purposes, and save manpower and resources. It is of certain reference value for the design of wastewater treatment equipment's discharge device.