Microwaves of wavelength 2cm emitted from a transmitter pass through two slits formed by…
- User
Microwaves of wavelength 2cm emitted from a transmitter pass through two slits formed by metal plates. The slits are separated by 6cm. A probe connecting to a meter is moved from a point X to the right to a point Y to detect the intensity of the microwaves received. The transmitter and point X are equidistant from A and B. Point X is on the same straight line as the transmitter.
Calculate the frequency of the waves.
- Assistant
We are not given any information about the frequency of the microwaves in the problem statement, and so we cannot calculate it.
- User
The speed of the microwaves is the same as that of any electromagnetic waves.
- Assistant
Yes, that is correct. The speed of electromagnetic waves in a vacuum is approximately 3 x 10^8 meters per second (m/s). This is often represented by the symbol c.
- User
So calculate the frequency of the microwaves.
- Assistant
We can use the equation:
c = f × λ
where c is the speed of light, f is the frequency of the waves, and λ is the wavelength of the waves.
The wavelength of the microwaves is given as 2 cm = 0.02 m. The distance between the slits is given as 6 cm = 0.06 m, which suggests that we are dealing with diffraction of waves. However, this information is not needed to calculate the frequency.
Thus, we have:
f = c / λ
f = (3 × 10^8 m/s) / (0.02 m)
f = 1.5 × 10^10 Hz or 15 GHz
Therefore, the frequency of the microwaves is 15 GHz.
- User
Express the answer in powers of 10.
- Assistant
The frequency of the microwaves is 1.5 x 10^10 Hz or 15 x 10^9 Hz.
- User
The meter shows alternate maxima and minima when the probe moves along XY. Explain.
- Assistant
The phenomenon you are describing is called interference, specifically, the interference of waves from the two slits in the metal plates that the microwaves pass through. As the waves pass through the slits, they diffract and spread out, forming circular wavefronts. These wavefronts then interfere with one another, either constructively (where the peaks of the waves align) or destructively (where the peaks of one wave meet the troughs of the other).
At points where the waves interfere constructively, they add up and produce a bright (maxima) fringe. At points where the waves interfere destructively, they cancel each other out and produce a dark (minima) fringe.
The pattern of bright and dark fringes on the meter, as detected by the probe moving along XY, is called an interference pattern. The spacing of the fringes is related to the wavelength of the waves, the distance between the two slits (the slit separation), and the distance from the slits to the detector (which in this case is the position of the probe). In other words, the interference pattern provides information about the nature of the waves themselves as they pass through the slits.
- User
The second minimum is foudn at position P where AP = 1.24m. Find BP.
- Assistant
Let us assume that the central maximum (brightest point) is along the line AB passing through the middle of the slits and perpendicular to them, as shown in the figure below:
[image: Two-Slit-Interference-Setup.png]
Let λ be the wavelength of the microwaves as we found earlier to be 0.02 m, and let d be the slit separation which is given as 6 cm = 0.06 m.
The distance from the slits to the first minimum on either side of the central maximum (located at points P and Q) are given by:
AP = λ/2 sinθ and BQ = λ/2 sinθ, where sinθ = BP/L.
Here, L is the distance between the slits and the screen (which is also the distance between the slits and the point where we are measuring the interference pattern), and is not given in the problem.
However, since point X is equidistant from A and B as given in the problem statement, we can assume that the distance BX is equal to the distance AX. Let this distance be denoted by d'. Thus, we have:
BP + d' = L
AP + d' = L
Subtracting the second equation from the first, we get:
BP - AP = 0
λ/2 sinθ = 0
sinθ = 0
This is only possible if BP is equal to L/2, which is located at the midpoint of the distance between the slits and the screen, because sin 0 = 0. Therefore, we have:
BP = L/2
Now, using the given value for AP (which is the distance from the slits to the second minimum on one side of the central maximum), we can find the value of L:
AP = λ/2 sinθ
sinθ = AP/(λ/2)
sinθ = 1.24/0.02
sinθ = 62
θ = sin^-1(62) (in degrees)
θ = 90° - 62° = 28°
Now, we can use the relationship between sinθ, BP, and L:
sinθ = BP/L
sin 28° = (L/2)/L
L = 2 BP/sin 28°
L = 2 x 1.24 m/sin 28°
L = 4.05 m
Therefore, the distance from the slits to the screen (or the position of the probe) is 4.05 m, and the distance BP is half of this value, i.e., 2.025 m.