Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0301· OpenAIAi2 WildChat-4.8M (AI2)

In this formula when I enter a value into A2 I want it to auto calculate. Private Sub…

  1. User

    In this formula when I enter a value into A2 I want it to auto calculate. Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("FF2")) Is Nothing Then ActiveSheet.Calculate If Application.CountA(Range("A2:E2")) = 5 Then Application.EnableEvents = False ActiveSheet.Calculate Application.EnableEvents = True

    Call Request 'uncomment this line if you want to call a separate subroutine or function Else Application.EnableEvents = False 'disable events temporarily Target.Value = "" 'reset the value of F2 Application.EnableEvents = True 'enable events again End If End If End Sub

  2. Assistant

    This VBA code is used to trigger a calculation in the worksheet whenever a change is made in cell F2. If the range A2:E2 has all 5 values entered, then the calculation is triggered again to update any related formulas or functions in the worksheet. If there are less than 5 values entered, then the value of F2 is reset to blank to prevent any inconsistencies in the worksheet. The Call Request line is commented out as it is not a necessary part of the code and can be added if a separate subroutine or function needs to be called.

  3. User

    what is the code doing, please explain

  4. Assistant

    This VBA code is used to automate calculations in a particular worksheet in Excel.

    The "Private Sub Worksheet_Change(ByVal Target As Range)" part is a trigger that activates the code whenever there is a change made in the worksheet.

    "If Not Intersect(Target, Range("FF2")) Is Nothing Then" is a condition that checks if the change made was in cell F2.

    The "ActiveSheet.Calculate" line triggers a calculation of the worksheet if there was a change made in cell F2.

    The "If Application.CountA(Range("A2:E2")) = 5 Then" condition checks if there are 5 values entered in the range A2:E2 or not.

    If there are 5 values, then it triggers the calculation again for any related formulas or functions in the worksheet and enables the events.

    If there are less than 5 values, then it resets the value of cell F2 to a blank space to prevent any inconsistencies in the worksheet.

    The "EnableEvents" command ensures that the calculations are not interrupted by any other events that may occur in the worksheet.

    Lastly, the "Call Request" line is commented out and is not part of the code, but it can be uncommented if there is another required subroutine or function to be called.

  5. User

    How can I stop the code looping when I answer No. Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("AA2")) Is Nothing Then Application.EnableEvents = False ActiveSheet.Calculate Application.EnableEvents = True

    Dim insured As Boolean Dim cleared As Boolean insured = (Range("G3").Value <> "") 'check if G3 has a value cleared = (Range("H3").Value <> "") 'check if H3 has a value

    ' Ask user if they want to send details to contractor If Not insured And Not cleared Then answer = MsgBox("Not Insured No DBS - Create INSURANCE/DBS Request?", vbYesNo + vbQuestion, "Send details") ElseIf Not insured Then answer = MsgBox("Contractor not Insured - Create INSURANCE Request?", vbYesNo + vbQuestion, "Send details") ElseIf Not cleared Then answer = MsgBox("Contractor not DBS'd - Create DBS Request?", vbYesNo + vbQuestion, "Send details") Else: Exit Sub 'Else 'answer = MsgBox("Would you like to send details to the contractor?", vbYesNo + vbQuestion, "Send details") End If

    If answer = vbYes Then

    'Activate Work Permit sheet Set wpSheet = ThisWorkbook.Sheets("Work Permit") wpSheet.Activate

    Exit Sub If Application.CountA(Range("A2:F2")) = 6 Then Application.EnableEvents = False ActiveSheet.Calculate Application.EnableEvents = True

    Call Request 'uncomment this line if you want to call a separate subroutine or function Else Application.EnableEvents = False 'disable events temporarily Target.Value = "" 'reset the value of F2 Application.EnableEvents = True 'enable events again End If End If End If End Sub

  6. Assistant

    In order to stop the code looping when you answer "No," you can add an "If" statement that checks if the user answered "No" or not, and then exits the code if the user answered "No." You can add the following code after the "If answer = vbYes Then" line:

    If answer = vbNo Then
        Exit Sub
    End If
    

    This will check if the user answered "No," and if the user did answer "No," then the code will exit without looping.

  7. User

    When the formula is run on a Change event, I want A3 to activate the messages to pop up depending on the values in G3 or H3. If I choose Yes to any of the messages activated, I want to go to the sheet Work Permit. If I answer No I want to remain in the Sheet Job Request and do not want the messages related to G3 or H3 to activate again. If A2:F2 = 6 then I want to Call Request. Can you please adjust the code to do this

  8. Assistant

    Sure, here's an updated version of the code that should meet your requirements:

    Private Sub Worksheet_Change(ByVal Target As Range)
        With Target
            If .CountLarge > 1 Then Exit Sub 'multiple cells being changed, ignore the event
            If Not Intersect(Target, Range("$A$2")) Is Nothing Then 'check if change happened in A2
                Application.EnableEvents = False 'disable events temporarily
                ActiveSheet.Calculate 'recalculate sheet
                Application.EnableEvents = True 'enable events again
                If Application.CountA(Range("A2:F2")) = 6 Then 'check if all 6 cells in A2:F2 have values
                    Call Request 'call the Request sub
                Else
                    Target.Value = "" 'reset the value of A2
                End If
            ElseIf Not Intersect(Target, Range("$A$3")) Is Nothing Then 'check if change happened in A3
                Dim insured As Boolean
                Dim cleared As Boolean
                Dim contractor As String
                insured = (Range("G3").Value <> "") 'check if G3 has a value
                cleared = (Range("H3").Value <> "") 'check if H3 has a value
                contractor = Range("B3")
                If Not insured And Not cleared Then 'neither G3 nor H3 have values
                    answer = MsgBox("Contractor " & contractor & " is not insured and has not been DBS'd. Create INSURANCE/DBS Request?", vbYesNo + vbQuestion, "Send details")
                ElseIf Not insured Then 'only G3 is empty
                    answer = MsgBox("Contractor " & contractor & " is not insured. Create INSURANCE Request?", vbYesNo + vbQuestion, "Send details")
                ElseIf Not cleared Then 'only H3 is empty
                    answer = MsgBox("Contractor " & contractor & " has not been DBS'd. Create DBS Request?", vbYesNo + vbQuestion, "Send details")
                Else 'both G3 and H3 have values
                    Exit Sub 'no need to create any requests
                End If
                If answer = vbYes Then 'if user clicks Yes on the message box
                    Sheets("Work Permit").Activate 'move to the Work Permit sheet
                Else 'if user clicks No on the message box
                    Exit Sub 'do nothing
                End If
            End If
        End With
    End Sub
    

    This code checks whether cell A2 or A3 was changed (using the Intersect method on the Target range). If A2 was changed, and all 6 cells in A2:F2 have values, it will call the Request sub. If A3 was changed, it checks whether G3 and/or H3 have values, and shows a message box with an appropriate question. If the user answers "Yes," it activates the "Work Permit" sheet, otherwise it does nothing (just exits the sub).

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.