How can I find out how many ports I have available on an HBA in Freebsd
- User
How can I find out how many ports I have available on an HBA in Freebsd
- Assistant
You can use the camcontrol command to find out how many ports you have available on an HBA in FreeBSD:
-
Open a terminal window.
-
Type the following command:
camcontrol devlist
This will display a list of your SCSI/SATA devices, including the HBA.
-
Look for the HBA in the list and note its device name (e.g. "pass0").
-
Type the following command, replacing "passX" with the actual device name of your HBA:
camcontrol inquiry passX
This will display information about your HBA, including the number of ports available.
Look for the "Number of Target Ports" field, which shows the number of ports on the HBA.
For example, if the field shows "4", then your HBA has 4 ports available.
-
- User
That gives me info on the disk, not the controller
- Assistant
I apologize for the confusion. You can use the
pciconf -lvcommand to find out the number of ports available on an HBA in FreeBSD:-
Open a terminal window.
-
Type the following command:
pciconf -lv
This will display information about the PCI devices connected to your system.
-
Look for the HBA in the list and note its device name (e.g. "ahc0").
-
Type the following command, replacing "ahcX" with the actual device name of your HBA:
pciconf -lv ahcX
This will display detailed information about your HBA, including the number of ports available.
Look for the "Primary Interrupt" field, which shows the number of ports on the HBA.
For example, if the field shows "IRQ 16", then your HBA has 16 ports available.
-