code: import cv2 from filterpy.kalman import KalmanFilter from ultralytics import YOLO…
- User
code: import cv2 from filterpy.kalman import KalmanFilter from ultralytics import YOLO import numpy as np import pandas as pd from sktime.datatypes._panel._convert import from_2d_array_to_nested from pickle import load from sktime.datatypes._panel._convert import from_nested_to_2d_array from sktime.datatypes import check_raise #from sktime.datatypes._panel._concat import concat
model = YOLO('/Users/surabhi/Documents/kalman/best.pt')
kf = KalmanFilter(dim_x=4, dim_z=2) kf.x = np.array([0, 0, 0, 0]) # initial state estimate kf.P = np.eye(4) * 1000 # initial error covariance matrix kf.F = np.array([[1, 0, 1, 0], [0, 1, 0, 1], [0, 0, 1, 0], [0, 0, 0, 1]]) # state transition matrix kf.H = np.array([[1, 0, 0, 0], [0, 1, 0, 0]]) # measurement matrix kf.R = np.diag([0.1, 0.1]) # measurement noise covariance matrix kf.Q= np.diag([0.1, 0.1, 0.1, 0.1]) dt = 1.0 u = np.zeros((4, 1))
cap = cv2.VideoCapture("1_1.mp4") frame_num = 0 predicted_points = [] bounce_detected = False last_bounce_frame = -5 test_df = pd.DataFrame(columns=[ 'x', 'y', 'V'])
while True: ret, frame = cap.read() if ret is False: break bbox = model(frame, show=True) frame_num += 1 for boxes_1 in bbox: result = boxes_1.boxes.xyxy if len(result) == 0: print("not detected") else: cx = int((result[0][0] + result[0][2]) / 2) cy = int((result[0][1] + result[0][3]) / 2) centroid = np.array([cx, cy]) kf.predict() kf.update(centroid) next_point = (kf.x).tolist() predicted_points.append((int(next_point[0]), int(next_point[1]))) V=np.sqrt(kf.x[2]**2 + kf.x[3]**2) test_df = test_df.append({ 'x': next_point[0], 'y': next_point[1], 'V': np.sqrt(kf.x[2]**2 + kf.x[3]**2)}, ignore_index=True) print(test_df) print("ENTER LOOP")
#test_df.drop(['x', 'y', 'V'], 1, inplace=True) #print(test_df) X = pd.concat([x, y, V],1) X = X.apply(pd.to_numeric, errors='coerce') #X = X.dropna() #X_2d = from_nested_to_2d_array(X) check_raise(X, mtype='pd.DataFrame') # load the pre-trained classifier clf = load(open('clf.pkl', 'rb')) print("X:",X) predcted = clf.predict(X) idx = list(np.where(predcted == 1)[0]) print("**************************************") print(idx) idx = np.array(idx) - 10 print(idx) if len(predicted_points) > 10: predicted_points.pop(0) if not bounce_detected and frame_num - last_bounce_frame > 10: if round(V)==19 or round(V)==22 : # If Y acceleration is less than the negative threshold, say -15 bounce_detected = True last_bounce_frame = frame_num print("Bounce detected") print("next_point", next_point) print("frame_number", frame_num) cv2.putText(frame, f'Frame: {frame_num}', (10, 50), cv2.FONT_HERSHEY_SIMPLEX, 1, (0, 255, 0), 2) cv2.circle(frame, (cx, cy), 5, (0,0,255), 5) cv2.circle(frame, (int(next_point[0]), int(next_point[1])), 5, (255, 0, 0), 10) for i, p in enumerate(predicted_points): color = (255,255,255) cv2.circle(frame, p, 5, color, 2) if bounce_detected: cv2.putText(frame, 'Bounce Detected', (10, 350), cv2.FONT_HERSHEY_SIMPLEX, 1, (0, 255, 0), 2) if kf.x[3] > 0: # After a bounce is detected, wait until acceleration is above the threshold, say -5, to detect the bounce again bounce_detected = False # test_df_1=pd.DataFrame({'frame': frame_num , 'x': next_point[0], 'y':next_point[1], 'vx':vx,'vy':vy ,'V': V}, index=[0]) #test_df.concat(test_df_1) #test_df=pd.concat([test_df,test_df_1], ignore_index=True) #test_df.to_csv('file.csv') cv2.imshow('raw', frame) #test_df=pd.DataFrame() # test_df=pd.concat([test_df,test_df_1], ignore_index=True) # print(trajectory_df) test_df.to_csv('file.csv') #test_df_1=pd.DataFrame({'frame': frame_num , 'x': next_point[0], 'y':next_point[1], 'vx':vx,'vy':vy ,'V': V}, index=[0]) # Uncomment the following lines to save the output video # out.write(frame) # if cv2.waitKey(1) & 0xFF == ord('q'): # breakcap.release() cv2.destroyAllWindows()
how to detect bounce of ball
- Assistant
The code already includes bounce detection. After predicting the next point using Kalman filter, the code checks if the Y acceleration is less than a threshold (currently set to 19 or 22 depending on the video), indicating that the ball has bounced. If a bounce is detected, the code waits until the acceleration is above another threshold (currently set to -5) before detecting the next bounce. Once a bounce is detected, the code sets a flag (
bounce_detected = True) and records the frame number of the last bounce (last_bounce_frame = frame_num).You can modify the code to adjust the threshold values to better suit your specific video or to improve the bounce detection accuracy.
- User
how can we detect bounce of ball using TimeSeriesForestClassifier model
- Assistant
To detect the bounce of a ball using
TimeSeriesForestClassifiermodel, you can do the following:- Store the trajectory of the ball as a time-series dataset, with columns representing the position (
xandycoordinates) and velocity (vxandvy) of the ball at each point in time. - Divide the time-series dataset into small, fixed-length windows or segments, such as 10 frames.
- Extract features from each window, such as mean, standard deviation, minimum, maximum, and other statistical or spectral features.
- Train a
TimeSeriesForestClassifiermodel on the labeled windows or segments. The labels should indicate whether each window corresponds to a bounce or a non-bounce. - Use the trained model to predict the labels of the windows or segments in the trajectory dataset.
- Combine the predicted labels of the windows or segments to detect the bounces of the ball. For example, you could count the number of consecutive predicted bounces to determine how many bounces have occurred.
Here's some sample code that demonstrates how to use
TimeSeriesForestClassifierfor bounce detection on a simulated trajectory dataset:import numpy as np import pandas as pd from sktime.classification.interval_based import TimeSeriesForestClassifier # Simulate a trajectory dataset with 4 columns: x, y, vx, vy n_frames = 1000 x = np.sin(np.linspace(0, 10*np.pi, n_frames)) y = np.cos(np.linspace(0, 20*np.pi, n_frames)) vx = np.gradient(x) vy = np.gradient(y) data = pd.DataFrame({'x': x, 'y': y, 'vx': vx, 'vy': vy}) # Assign labels to the trajectory dataset to indicate bounce or non-bounce bounces = [250, 500, 750] labels = pd.Series(['non-bounce'] * n_frames) for i in bounces: labels.iloc[i:i+10] = 'bounce' # Divide the trajectory dataset into fixed-length windows or segments window_size = 10 n_windows = n_frames - window_size + 1 X = np.zeros((n_windows, 4, window_size)) for i in range(n_windows): X[i] = data.iloc[i:i+window_size].values.T # Compute features for each window or segment feature_functions = ['mean', 'std', 'min', 'max'] features = pd.DataFrame(index=range(n_windows)) for func in feature_functions: for col in data.columns: features[f'{func}_{col}'] = getattr(np, func)(X, axis=2)[:, data.columns.tolist().index(col)] # Train a TimeSeriesForestClassifier model on the labeled windows or segments clf = TimeSeriesForestClassifier(n_estimators=100, random_state=0) clf.fit(features, labels.iloc[window_size-1:]) # Predict the labels of the windows or segments y_pred = clf.predict(features) # Combine the predicted labels of the windows or segments to detect the bounces of the ball n_bounces = 0 bounce_detected = False for i, label in enumerate(y_pred): if label == 'bounce' and not bounce_detected: n_bounces += 1 bounce_detected = True elif label == 'non-bounce': bounce_detected = False print(f'Number of bounces detected: {n_bounces}')Note that this is a simplified example and the actual implementation may require some modifications and fine-tuning, such as choosing appropriate feature functions, optimizing the window size and model parameters, and handling missing or noisy data.
- Store the trajectory of the ball as a time-series dataset, with columns representing the position (
- User
pickle classifier model
- Assistant
To pickle a
TimeSeriesForestClassifiermodel, you can use thepicklemodule in Python. Here's an example:import pickle from sktime.classification.interval_based import TimeSeriesForestClassifier # Train a TimeSeriesForestClassifier model on a dataset clf = TimeSeriesForestClassifier(n_estimators=100, random_state=0) # ... code to load and preprocess data, split into train and test sets, etc. clf.fit(X_train, y_train) # Pickle the trained model to a file with open('classifier.pkl', 'wb') as file: pickle.dump(clf, file)To load the pickled model from a file, you can use the following code:
import pickle # Load the pickled model from a file with open('classifier.pkl', 'rb') as file: clf = pickle.load(file)Note that the
picklemodule can also be used to serialize and deserialize other Python objects, such as Pandas dataframes, NumPy arrays, and other models and objects. - User
how to detect bounce using pickle classifier with 20 features
- Assistant
If you have a
TimeSeriesForestClassifiermodel with 20 features that was trained on a trajectory dataset, you can use it to detect bounces in a new trajectory dataset by doing the following:- Store the new trajectory dataset as a time-series dataset, with the same column names and number of features as the training dataset.
- Divide the new trajectory dataset into small, fixed-length windows or segments, such as 10 frames.
- Extract the same features from each window or segment as were used in training the model.
- Load the pickled
TimeSeriesForestClassifiermodel from a file. - Use the
predictmethod of the model to predict the labels of the windows or segments in the new trajectory dataset. - Combine the predicted labels of the windows or segments to detect the bounces of the ball.
Here's some sample code that shows how to do this:
import numpy as np import pandas as pd import pickle from sktime.classification.interval_based import TimeSeriesForestClassifier # Load the pickled model from a file with open('classifier.pkl', 'rb') as file: clf = pickle.load(file) # Load the new trajectory dataset as a time-series dataset data = pd.read_csv('new_trajectory.csv') # Divide the trajectory dataset into fixed-length windows or segments window_size = 10 n_windows = len(data) - window_size + 1 X = np.zeros((n_windows, 20, window_size)) for i in range(n_windows): X[i] = data.iloc[i:i+window_size].values.T # Compute the same features for each window or segment as were used in training the model feature_functions = ['mean', 'std', 'min', 'max'] features = pd.DataFrame(index=range(n_windows)) for func in feature_functions: for col in data.columns: features[f'{func}_{col}'] = getattr(np, func)(X, axis=2)[:, data.columns.tolist().index(col)] # Use the trained model to predict the labels of the windows or segments y_pred = clf.predict(features) # Combine the predicted labels of the windows or segments to detect the bounces of the ball n_bounces = 0 bounce_detected = False for i, label in enumerate(y_pred): if label == 'bounce' and not bounce_detected: n_bounces += 1 bounce_detected = True elif label == 'non-bounce': bounce_detected = False print(f'Number of bounces detected: {n_bounces}')Note that this code assumes that the new trajectory dataset has been preprocessed and cleaned in the same way as the training dataset, and that the features extracted from the windows or segments are the same as those used in training the model. If the feature extraction procedure or the data preprocessing steps are different, you may need to modify the code accordingly.
- User
how to use clf.pkl model to detect ball bounce
- Assistant
If you have a pickled
TimeSeriesForestClassifiermodel saved to a file namedclf.pkl, you can use it to detect bounces in a new trajectory dataset by doing the following:- Store the new trajectory dataset as a Pandas DataFrame, with each row representing the position and velocity of the ball at a single point in time.
- Divide the new trajectory dataset into small, fixed-length windows or segments, such as 10 frames.
- Extract features from each window, such as mean, standard deviation, minimum, maximum, and other statistical or spectral features, that you used in training the model.
- Load the pickled
TimeSeriesForestClassifiermodel from the file using thepicklemodule. - Use the
predictmethod of the model to predict the labels of the windows or segments in the new trajectory dataset. - Combine the predicted labels of the windows or segments to detect the bounces of the ball.
Here's some sample code that demonstrates how to use the pickled
TimeSeriesForestClassifiermodel to detect bounces in a new trajectory dataset:import numpy as np import pandas as pd import pickle # Load the pickled model from a file with open('clf.pkl', 'rb') as file: clf = pickle.load(file) # Load the new trajectory dataset as a Pandas DataFrame data = pd.read_csv('new_trajectory.csv') # Divide the trajectory dataset into fixed-length windows or segments window_size = 10 n_windows = len(data) - window_size + 1 X = np.zeros((n_windows, window_size, 4)) for i in range(n_windows): X[i] = data.iloc[i:i+window_size].values # Compute features for each window or segment feature_functions = ['mean', 'std', 'min', 'max'] features = pd.DataFrame(index=range(n_windows)) for func in feature_functions: for col in data.columns: features[f'{func}_{col}'] = getattr(np, func)(X, axis=1)[:, data.columns.tolist().index(col)] # Use the trained model to predict the labels of the windows or segments y_pred = clf.predict(features) # Combine the predicted labels of the windows or segments to detect the bounces of the ball n_bounces = 0 bounce_detected = False for i, label in enumerate(y_pred): if label == 1 and not bounce_detected: n_bounces += 1 bounce_detected = True elif label == 0: bounce_detected = False print(f'Number of bounces detected: {n_bounces}')Note that this code assumes that the new trajectory dataset has the same format, columns, and units as the training dataset, and that the feature extraction procedure is the same as that used in training the model. If the new dataset has different features or units, you may need to modify the code to match.
- User
in real time
- Assistant
To use the pickled classifier model to detect ball bounces in real-time, you can modify the code provided earlier to continuously read the position and velocity of the ball from a video or sensor stream, and to update the prediction at a fixed rate or when new data is available. Here's an example of how to do this:
import numpy as np import pandas as pd import pickle # Load the pickled model from a file with open('clf.pkl', 'rb') as file: clf = pickle.load(file) # Set up variables for real-time operation window_size = 10 prev_positions = np.zeros((window_size, 2)) prev_velocities = np.zeros((window_size, 2)) predicted_labels = [0] * window_size # Initialize the video or sensor stream cap = cv2.VideoCapture(0) while True: # Read the current position and velocity of the ball ret, frame = cap.read() if ret is False: break # ... code to detect the position and velocity of the ball from the frame # Update the previous positions and velocities prev_positions[:-1] = prev_positions[1:] prev_positions[-1] = current_position prev_velocities[:-1] = prev_velocities[1:] prev_velocities[-1] = current_velocity # Compute the features for the new window mean_position = np.mean(prev_positions, axis=0)
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.