I'm experiencing an error when using NLA authentication for RDP on Windows. The error is…
- User
I'm experiencing an error when using NLA authentication for RDP on Windows. The error is that my domain controller cannot be contacted, even though I am able to ping the domain controller from the affected system. How do I resolve this?
Assistant
Are you using the NLA authentication on the local system or the remote system? If you're using it on the local system, the issue is likely a firewall issue, and you'll need to open firewall ports 135, 445, and 3389 on the local system. If you're using it on the remote system, you'll need to make sure that the remote system is able to contact the domain controller. You can test this by opening up a command prompt on the remote system and pinging the domain controller.
- User
what services are the firewall ports mentioned above used for
Assistant
Ports 135 and 445 are used for the Server Message Block (SMB) protocol, which is used for file and print sharing. Port 3389 is used for remote desktop services.
- User
how does SMB fit in with RDP and domain controller authentication
Assistant
RDP uses the SMB protocol for file and print sharing, as well as for communication between the client and the domain controller. The domain controller needs to be able to communicate with the client in order to be able to perform authentication. If the domain controller cannot communicate with the client, authentication will fail.
- User
would I have to open the ports mentioned previously on the domain controller, client, or both
Assistant
You'll need to open the ports on both systems. On the domain controller, you'll need to open ports 135, 445, and 3389. On the client, you'll need to open ports 135, 445, and 3389. You'll need to add firewall rules on both systems.
- User
what direction would these firewall rules need to be on each system
Assistant
On the domain controller, you'll need to add firewall rules to allow traffic in on ports 135, 445, and 3389. On the client, you'll need to add firewall rules to allow traffic out on ports 135, 445, and 3389.
- User
what if the remote system is domain-joined
Assistant
If the remote system is domain-joined, then you will need to make sure that the domain controller is able to contact the remote system. You can test this by opening up a command prompt on the domain controller and pinging the remote system. Additionally, you will need to make sure that the remote system is able to contact the domain controller. You can test this by opening up a command prompt on the remote system and pinging the domain controller.
If you are still experiencing issues, you may need to check the firewall settings on both the domain controller and the remote system. Make sure that the firewall is allowing traffic on ports 135, 445, and 3389. Additionally, you may need to check the authentication settings on the remote system. Make sure that the authentication settings are set to use NLA authentication.
If you are still experiencing issues, you may need to check the event logs on both the domain controller and the remote system. This can help you identify any errors that may be occurring. Additionally, you may need to check the network settings on both the domain controller and the remote system. Make sure that the network settings are configured correctly and that the domain controller is able to communicate with the remote system.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.