Skip to content
TheChatArchiveThe Chat Archive
Qwenqwen-14b-chat· Alibaba (Qwen)Hugging Face Arena Human Preference 55K

#include <ArduinoFreeRTOS.h> #include <semphr.h> #include <LedControl.h> #define DINPIN…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Metallama-2-70b-chat’s answer.
  1. User

    #include <Arduino_FreeRTOS.h> #include <semphr.h> #include <LedControl.h>

    #define DIN_PIN 11 #define CS_PIN 10 #define CLK_PIN 9

    #define LED1_PIN 13 #define LED2_PIN 12

    #define POT_PIN A0

    LedControl lc = LedControl(DIN_PIN, CLK_PIN, CS_PIN, 4);

    SemaphoreHandle_t led1Mutex; SemaphoreHandle_t led2Mutex; SemaphoreHandle_t lcdMutex; TaskHandle_t task1, task2, taskLcd;

    void toggleLed1(void*) { while(1) { xSemaphoreTake(led1Mutex, portMAX_DELAY); digitalWrite(LED1_PIN, !digitalRead(LED1_PIN)); vTaskDelay(500 / portTICK_PERIOD_MS); xSemaphoreGive(led1Mutex); } }

    void toggleLed2(void*) { while(1) { xSemaphoreTake(led2Mutex, portMAX_DELAY); digitalWrite(LED2_PIN, !digitalRead(LED2_PIN)); vTaskDelay(1300 / portTICK_PERIOD_MS); xSemaphoreGive(led2Mutex); } }

    void controlLcd(void*) {

    while(1) {

    xSemaphoreTake(lcdMutex, portMAX_DELAY);

    for(int r=0; r<8; r++) { for(int i=0; i<4; i++) { for(int c=0; c<8; c++) { lc.setLed(i, r, c, true); int sensorValue = analogRead(POT_PIN); int delayMs = map(sensorValue, 0, 1023, 50, 500); vTaskDelay(delayMs / portTICK_PERIOD_MS); lc.setLed(i, r, c, false); } } }

    xSemaphoreGive(lcdMutex); }

    }

    void setup() {

    led1Mutex = xSemaphoreCreateMutex(); led2Mutex = xSemaphoreCreateMutex(); lcdMutex = xSemaphoreCreateMutex();

    pinMode(LED1_PIN, OUTPUT); pinMode(LED2_PIN, OUTPUT); pinMode(POT_PIN, INPUT);

    // inicjalizacja MAX7219

    xTaskCreate(toggleLed1, "", 100, NULL, 1, &task1); xTaskCreate(toggleLed2, "", 100, NULL, 1, &task2); xTaskCreate(controlLcd, "", 200, NULL, 2, &taskLcd);

    vTaskStartScheduler(); }

    void loop() {}

    dodaj komentarze do kodu opisujące co robi, tylko nie za dużo i po polsku bez polskich znaków

  2. Qwen Assistant

    #include <Arduino_FreeRTOS.h> #include <semphr.h> // includes for FreeRTOS and semaphores #include <LedControl.h> // includes for controlling the LED strip #define DIN_PIN 11 // pin for the data input of the MAX7219 controller #define CS_PIN 10 // pin for the chip select of the MAX7219 controller #define CLK_PIN 9 // pin for the clock input of the MAX7219 controller #define LED1_PIN 13 // pin for the first LED on the strip #define LED2_PIN 12 // pin for the second LED on the strip #define POT_PIN A0 // pin for the potentiometer, which will control the brightness of the LEDs

    LedControl lc = LedControl(DIN_PIN, CLK_PIN, CS_PIN, 4); // creates an instance of the LedControl class, which controls the LED strip SemaphoreHandle_t led1Mutex; // creates a semaphore for mutual exclusion when accessing the first LED SemaphoreHandle_t led2Mutex; // creates a semaphore for mutual exclusion when accessing the second LED SemaphoreHandle_t lcdMutex; // creates a semaphore for mutual exclusion when accessing the LCD display TaskHandle_t task1, task2, taskLcd; // creates handles for the tasks that control the LEDs and the LCD display

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.