Skip to content
TheChatArchiveThe Chat Archive
koala-13b· UC BerkeleyHugging Face Arena Human Preference 55K

Can you teach me about fanuc mill cnc gcode programming, show me code snippets

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with vicuna-13b’s answer.
  1. User

    Can you teach me about fanuc mill cnc gcode programming, show me code snippets

  2. Assistant

    Sure, I'd be happy to teach you about Fanuc mill CNC G-code programming and show you some sample code snippets.

    G-codes, or G-code commands, are the standard set of control codes used in CNC (Computer Numerical Control) programming. These commands allow you to specify various functions and movements of the machine, such as turning on and off the machine, selecting the tool and tool length, and specifying the desired movement. The specific G-codes used by Fanuc mill CNC machines may vary slightly from those used by other brands, but they will generally be similar in function.

    Here are a few examples of G-codes that you may need to use when programming a Fanuc mill CNC machine:

    • G1: Turn on the machine
    • G2: Select the tool and tool length
    • G3: Set the feed rate
    • G4: Set the depth of cut
    • G5: Set the axis steps per mm
    • G6: Set the axis units
    • G7: Set the axis degrees
    • G8: Set the axis inches
    • G9: Set the axis meters
    • G10: Set the axis points
    • G11: Select the interpolation method
    • G12: Select the interpolation increment
    • G13: Select the interpolation axis
    • G14: Select the interpolation function (e.g. linear, circular, etc.)
    • G15: Select the interpolation method for circular interpolation
    • G16: Select the interpolation axis for circular interpolation
    • G17: Select the interpolation function for circular interpolation
    • G18: Select the interpolation axis for circular interpolation
    • G19: Select the interpolation function for circular interpolation
    • G20: Set the interpolation axis for circular interpolation
    • G21: Set the interpolation function for circular interpolation
    • G22: Set the interpolation axis for circular interpolation
    • G23: Set the interpolation function for circular interpolation
    • G24: Set the interpolation axis for circular interpolation

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.