Skip to content
TheChatArchiveThe Chat Archive
gpt-4-0613· OpenAIHugging Face Arena Human Preference 55K

how to use rexx in mainframe programming

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-2.0’s answer.
  1. User

    how to use rexx in mainframe programming

  2. Assistant

    REXX (Restructured Extended Executor) is a high-level programming language commonly used in mainframe computers for scripting and automation tasks. Here is how you can use REXX in mainframe programming:

    1. Writing a REXX program in Mainframe:

    The first step to using REXX in mainframe programming is to write a REXX program. You can write a REXX program in a PDS (Partitioned Data Set) member. Start by creating a new PDS or use an existing one. Then, create a new member and write your REXX program in it.

    Here is an example of a basic REXX program:

    /*REXX*/
    SAY 'Hello, World!'
    EXIT
    

    This program will print the text "Hello, World!".

    1. Executing a REXX program:

    Once you have written your REXX program, you can execute it. To do this, you need to type "EX" or "EXEC" in the command line and press enter. You can also execute a REXX program by typing the command "TSO EXEC 'your.PDS(member)'" and pressing enter.

    1. Debugging a REXX program:

    If your REXX program is not working as expected, you may need to debug it. You can debug a REXX program by using the TRACE command. The TRACE command will display each line of your program as it is executed, allowing you to see exactly what is happening.

    1. Using REXX with JCL:

    You can also use REXX with Job Control Language (JCL). To do this, you can write a JCL program that executes your REXX program. Here is an example of a JCL program that executes a REXX program:

    //JOBNAME JOB (ACCT),'NAME'
    //STEP1 EXEC PGM=IKJEFT01
    //SYSEXEC DD DSN=your.PDS,DISP=SHR
    //SYSTSPRT DD SYSOUT=*
    //SYSTSIN DD *
    %member
    /*
    

    This JCL program will execute the REXX program stored in the specified PDS member.

    Remember, REXX is case insensitive and does not require variable declarations. It's a powerful tool in the hands of mainframe programmers, system administrators, and even casual users for automating repetitive tasks.

  3. User

    What are panels in rexx mainframe programming and how to use them

  4. Assistant

    In mainframe programming, panels are used to create interactive user interfaces. They are typically written in ISPF Dialog Manager language but can be driven by REXX scripts. Here's a brief explanation and a simple example of how to use panels with REXX:

    What are Panels?

    Panels in mainframe programming are essentially screens that interact with users, allowing them to input data and view results. They are used in conjunction with dialog services provided by ISPF (Interactive System Productivity Facility) to create interactive applications.

    How to Use Panels in REXX Mainframe Programming?

    1. Creating a Panel:

      A panel is created in a PDS (Partitioned Data Set) member. The panel definition includes a) Panel layout which defines how the panel looks like and b) Panel attributes which define the behavior of the fields on the panel.

      Here is an example of a simple panel:

      )ATTR
      DEFAULT(%)
      )BODY
      %-------------------------------%
      %   Enter your name: +_name     %
      %-------------------------------%
      )INIT
      .ZVARS = '(name)'
      )PROC
      VER(&ZTDVARS,&ZVARS)
      )END
      

      In the panel definition above, _name is a variable input field where users can enter their name.

    2. Displaying the Panel:

      Once the panel is created, it can be displayed using the DISPLAY service in a REXX program. Use the DISPLAY service with the TSO command processor (ISPEXEC) to display the panel.

      For instance, to display a panel named PANEL1, use the following code in your REXX program:

      /*REXX*/
      ADDRESS ISPEXEC
      "DISPLAY PANEL(PANEL1)"
      
    3. Using User Input:

      After the panel is displayed, the user can enter data into the input fields. This data can be captured and used in the REXX program.

      For instance, to capture the name entered by the user in the example panel above, use the following code in your REXX program:

      /*REXX*/
      ADDRESS ISPEXEC
      "DISPLAY PANEL(PANEL1)"
      SAY 'Hello,' name
      

      In this example, the REXX program will display the panel, capture the name entered by the user, and print a greeting message with the user's

  5. User

    help me create a rexx to compare two PS files in mainframe and output an message whether they are matching or not

  6. Assistant

    Sure, here is an example of a REXX program that compares two PS files and prints a message indicating whether they match or not:

    /* REXX */
    ADDRESS TSO
    "ALLOC F(INDD1) DSN('your.dataset1') SHR REU"
    "ALLOC F(INDD2) DSN('your.dataset2') SHR REU"
    "ALLOC F(OUTDD) NEW REU",
    " SPACE(5,5) TRACKS",
    " LRECL(80) RECFM(F,B) BLKSIZE(8000)",
    " DSN('your.output.dataset')"
    
    "EXECIO * DISKR INDD1 (STEM DATA1. FINIS"
    "EXECIO * DISKR INDD2 (STEM DATA2. FINIS"
    
    IF DATA1.0 <> DATA2.0 THEN DO
        SAY 'Files do not match: different number of lines.'
        "EXECIO 1 DISKW OUTDD (STEM 'Files do not match: different number of lines.')"
        EXIT
    END
    
    DO I = 1 TO DATA1.0
        IF DATA1.I <> DATA2.I THEN DO
            SAY 'Files do not match: different content.'
            "EXECIO 1 DISKW OUTDD (STEM 'Files do not match: different content.')"
            EXIT
        END
    END
    
    SAY 'Files match.'
    "EXECIO 1 DISKW OUTDD (STEM 'Files match.')"
    "EXECIO * DISKW OUTDD (FINIS"
    "FREE F(INDD1,INDD2,OUTDD)"
    EXIT
    

    This REXX program first allocates the two datasets you want to compare (replace 'your.dataset1' and 'your.dataset2' with the actual names of your datasets) and an output dataset. Then, it reads the contents of the two datasets into two stem variables (arrays), DATA1 and DATA2.

    The program first compares the number of lines in the two files. If they are different, it prints a message indicating that the files do not match and exits. If the number of lines is the same, it then compares the content of each line. If it finds a line that is different, it prints a message indicating that the files do not match and exits. If it gets through all the lines without finding any differences, it prints a message indicating that the files match.

    Note: Please ensure you have necessary permissions and the datasets are not in use while running this program

  7. User

    now, create a rexx panel to provide the input files and to see the output message

  8. Assistant

    Sure. Here, we'll create a panel to provide input for the PS files to be compared and to display the output message.

    1. Creating the Panel:

      The panel will have two input fields for the two PS files and a message field for the output message.

      )ATTR
      DEFAULT(%)
      )BODY
      %---------------------------------%
      %   Enter first file:  +_file1    %
      %   Enter second file: +_file2    %
      %   Output message:    )_msg      %
      %---------------------------------%
      )INIT
      .ZVARS = '(file1 file2 msg)'
      )PROC
      VER(&ZTDVARS,&ZVARS)
      )END
      

      Here, _file1 and _file2 are the input fields where users can enter the names of the PS files to be compared. _msg is the output message field.

    2. Modifying the REXX Program:

      Modify the REXX program to use the panel for input and output.

      /* REXX */
      ADDRESS ISPEXEC
      "VPUT (file1 file2)"
      "DISPLAY PANEL(PANEL1)"
      "VGET (file1 file2)"
      
      ADDRESS TSO
      "ALLOC F(INDD1) DSN('"file1"') SHR REU"
      "ALLOC F(INDD2) DSN('"file2"') SHR REU"
      
      "EXECIO * DISKR INDD1 (STEM DATA1. FINIS"
      "EXECIO * DISKR INDD2 (STEM DATA2. FINIS"
      
      IF DATA1.0 <> DATA2.0 THEN DO
          msg = 'Files do not match: different number of lines.'
          EXIT
      END
      
      DO I = 1 TO DATA1.0
          IF DATA1.I <> DATA2.I THEN DO
              msg = 'Files do not match: different content.'
              EXIT
          END
      END
      
      msg = 'Files match.'
      
      ADDRESS ISPEXEC
      "VPUT (msg)"
      "DISPLAY PANEL(PANEL1)"
      
      "FREE F(INDD1,INDD2)"
      EXIT
      

      This modified REXX program first displays the panel and captures the names of the PS files entered by the user. It then proceeds

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.