Skip to content
The Chat Archive
gpt-4-0613· OpenAI Arena Human Preference 55K

Помоги мне с установкой oasis linux, я новичек. У меня UEFI компьютер с 2 дисками:…

  1. User

    Помоги мне с установкой oasis linux, я новичек. У меня UEFI компьютер с 2 дисками: первый — NVMe на котором установлен debian 12, второй — полностью пустой xvdi, куда я и хочу установить oasis. Мой часовой пояс — Екатернбург. У меня 16 гб озу поэтому раздел подкачки создавать не имеет смысла. Подробно опиши разбиение диска на разделы и монтирование. Вот .md файл вики oasis lilnux:

    Prerequisites

    To build oasis, you need a POSIX system with following tools:

    • C toolchain for both host and target system
    • curl
    • git
    • gzip (or compatible tool)
    • lua
    • ninja
    • zic

    On a Debian-based system, you'll need to install a few packages.

    sudo apt install bison curl git ninja-build lua5.2 pax
    

    If you plan to build desktop and multimedia components as well, you'll need a few more.

    sudo apt install libwayland-dev libpng-dev nasm
    

    You'll also need a toolchain targeting musl libc. I recommend musl-cross-make if you want to build your own. If not, you can grab one from musl.cc.

    curl -O http://musl.cc/x86_64-linux-musl-cross.tgz
    zcat x86_64-linux-musl-cross.tgz | pax -r
    PATH=$PATH:$PWD/x86_64-linux-musl-cross/bin
    

    You should make sure that your git config has a set user and email (for applying patches).

    git config --global user.name $MYNAME
    git config --global user.email $MYEMAIL
    

    Installation

    These instructions use some references to environment variables. You are meant to replace those with appropriate values for your system.

    • EDITOR: Your text editor (e.g. vim).
    • DRIVE: Your target disk device (e.g. sda).
    • ROOTPART: Your / partition device (e.g. sda2).
    • BOOTPART: Your /boot partition device (e.g. sda1).
    • TIMEZONE: Your timezone (e.g. US/Pacific).
    • ROOT: Mounted root filesystem for target.

    First, prepare a root directory for oasis at $ROOT. You should mount any sub-filesystems you want at this time (for example, /boot).

    cd $ROOT
    git clone -c 'core.sharedRepository=group' https://github.com/oasislinux/oasis.git src/oasis
    git init --template src/oasis/template
    cd src/oasis
    

    Next, configure config.lua to your liking.

    cp config.def.lua config.lua
    $EDITOR config.lua
    

    A typical install involves writing filesystem objects to your / repository, so make sure to update the repo table in config.lua accordingly.

    repo={
    	path='../..',
    	flags='',
    	tag='tree',
    	branch='oasis',
    }
    

    Generate the ninja build files.

    lua setup.lua
    

    Build oasis.

    ninja commit
    

    Merge built system into root repository.

    cd $ROOT
    git config branch.master.remote .
    git config branch.master.merge oasis
    git merge
    ./libexec/applyperms
    

    You may want to include a toolchain.

    git remote add toolchain https://github.com/oasislinux/toolchain.git
    git fetch toolchain '--depth=1'
    git config --add branch.master.merge toolchain/master
    git merge --allow-unrelated-histories
    

    Prepare your /etc directory.

    (cd /tmp && curl -LO https://github.com/oasislinux/etc/archive/master.tar.gz)
    zcat /tmp/master.tar.gz | pax -r -s ',^etc-[^/]*,etc,'
    ./libexec/applyperms -d etc
    rm etc/.perms
    

    It is possible to maintain your /etc directory with git just as / (set oasis.root=..), but this is not recommended since perp uses the VTX bit to keep track of active services, and merge conflicts or permission errors could have disastrous side-effects.

    Set up your system configuration.

    ln -s ../share/zoneinfo/$TIMEZONE etc/localtime
    cat >>etc/fstab <<EOF
    /dev/$ROOTPART / ext4 rw,relatime 0 1
    /dev/$BOOTPART /boot ext2 rw,relatime,noauto 0 0
    EOF
    touch var/log/lastlog
    

    Configure /etc/rc.local to do any necessary initialization for your system (e.g. keymap, networking). This script runs during boot before starting perp. You may also want to make changes to /etc/profile.

    $EDITOR etc/rc.local
    $EDITOR etc/profile
    

    The default root password is oasis. If you would like to choose something else before booting into the system, you should chroot into the new filesystem and run passwd.

    Kernel

    Build/obtain a kernel. By convention, install it at /boot/linux.

    For an oasis-specific kernel build procedure, see [[Kernel]].

    Bootloader

    Feel free to install any bootloader you want.

    syslinux

    syslinux is one option that is easy and convenient. On Debian-based systems, you can install extlinux.

    sudo apt install extlinux
    

    For a BIOS system:

    mkdir $ROOT/boot/syslinux
    extlinux --install $ROOT/boot/syslinux
    dd if=/usr/lib/EXTLINUX/mbr.bin of=/dev/$DRIVE bs=440
    cat >$ROOT/boot/syslinux/syslinux.cfg <<EOF
    PROMPT 1
    TIMEOUT 50
    DEFAULT oasis
    
    LABEL oasis
    	LINUX ../linux
    	APPEND root=/dev/$ROOTPART init=/bin/sinit ro
    EOF
    

    On an oasis system, if installed, mbr.bin can be found at /lib/syslinux/bios/mbr.bin.

    Don't forget to make sure your boot partition is marked bootable!

    efibootmgr

    If your system uses UEFI and you built your kernel with CONFIG_EFI_STUB=y, you can use efibootmgr to set up a new boot entry.

    efibootmgr -c -d /dev/$DRIVE -p $BOOTPARTNUM -l /linux -L oasis "root=/dev/$ROOTPART init=/bin/sinit ro"
    

    You might also want to enable efibootmgr in your config.lua.

    Initial setup

    Some common administration tasks are described in [[Administration]].

  2. Assistant

    Ваша задача весьма специфическая, и поскольку вы используете UEFI-систему, процесс может немного отличаться, но я постараюсь максимально подробно описать каждый шаг.

    1. Подготовка

      Установите все необходимые инструменты на вашу текущую систему (Debian 12), используя команды, указанные в вики.

    2. Подготовка диска

      Для установки Oasis Linux вам потребуется создать как минимум два раздела: один для /boot, и один для корневого раздела /.

      Используйте fdisk или gdisk для управления разделами на вашем диске xvdi. Вы должны создать два раздела: один маленький (например, 512МБ) для /boot и один большой для / (остальное пространство на диске).

      Например, если вы используете fdisk, команды могут выглядеть так:

      fdisk /dev/xvdi
      n # новый раздел
      p # primary
      1 # номер раздела
        # по умолчанию - начало диска
      +512M # размер раздела
      n # новый раздел
      p # primary
      2 # номер раздела
        # по умолчанию - начало диска
        # по умолчанию - конец диска
      w # записать изменения
      

      Далее, вы должны создать файловые системы на этих разделах:

      mkfs.ext2 /dev/xvdi1
      mkfs.ext4 /dev/xvdi2
      

      Теперь вы можете монтировать эти разделы (предположим, что у вас есть папка /mnt/oasis):

      mount /dev/xvdi2 /mnt/oasis
      mkdir /mnt/oasis/boot
      mount /dev/xvdi1 /mnt/oasis/boot
      
    3. Установка Oasis

      Теперь следуйте инструкциям по установке в вики. Замените DRIVE=xvdi, ROOTPART=xvdi2, BOOTPART=xvdi1, TIMEZONE=Asia/Yekaterinburg и ROOT=/mnt/oasis.

    4. Установка загрузчика

      Для UEFI-системы можно использовать efibootmgr. Убедитесь, что ваш ядро собрано с CONFIG_EFI_STUB=y, и следуйте инструкциям в вики для настройки новой записи загрузки.

    Пожалуйста, убедитесь, что вы читаете и понимаете каждую команду, прежде чем её выполнять. Установка новой системы может быть сложной и потенциально рискованной задачей, если вы не знаете, что делаете. Если вы столкнетесь с проблемами, не стесняйтесь задавать дополнительные вопросы.