Skip to content
TheChatArchiveThe Chat Archive
OpenChatopenchat-3.5· OpenChatHugging Face Arena Human Preference 55K

Hello, could you please write me an arduino code, that blinks an led continually on and…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Metallama-2-70b-chat’s answer.
  1. User

    Hello, could you please write me an arduino code, that blinks an led continually on and off? Input should be the pin of the led and an integer value defining the blinking intervall The function has to be continually called for the blinking to work, don't use delay()

  2. OpenChat Assistant

    Sure, here's an Arduino code that blinks an LED continually on and off using the millis() function to control the timing without using delay().

    #include <Arduino.h>
    
    // Define the LED pin and blink interval
    const int ledPin = 13; // Change this to the pin number of your LED
    unsigned long blinkInterval = 500; // Change this to the blink interval in milliseconds
    
    // Variables to keep track of the current time and the state of the LED
    unsigned long currentTime;
    bool ledState = false;
    
    void setup() {
      // Set the LED pin as an output
      pinMode(ledPin, OUTPUT);
    
      // Attach the blink function to a timer interrupt
      attachInterrupt(0, blink, LOW);
    }
    
    void loop() {
      // Nothing to do in the loop, the LED will blink based on the timer interrupt
    }
    
    void blink() {
      // Get the current time
      currentTime = micros();
    
      // Calculate the time elapsed since the last blink
      unsigned long elapsedTime = currentTime - previousTime;
    
      // If enough time has elapsed, blink the LED
      if (elapsedTime >= blinkInterval) {
        digitalWrite(ledPin, !ledState);
        ledState = !ledState;
      }
    }
    

    To use this code, replace ledPin with the pin number of your LED and blinkInterval with the desired blinking interval in milliseconds. The setup() function sets the LED pin as an output and attaches the blink() function to a timer interrupt. The blink() function is called whenever the interrupt is triggered, which happens regularly based on the system's timer.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.