Skip to content
TheChatArchiveThe Chat Archive
gpt-4-0314· OpenAIHugging Face Arena Human Preference 55K

Please modify the following code to recognize Aruco table using library opencv 4.8.0.…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with Claudeclaude-1’s answer.
  1. User

    Please modify the following code to recognize Aruco table using library opencv 4.8.0. The aruco table has 7x10 size, marker size 34mm, dictionary AruCo DICT_6x6

    CHECKERBOARD = (7,10)
    SINGLE_SQUARE = 28.67
        img = cv.imread(fname)
        gray = cv.cvtColor(img, cv.COLOR_BGR2GRAY)
        ret, corners = cv.findChessboardCorners(gray, CHECKERBOARD, None)
    
  2. Assistant

    To recognize an Aruco table using OpenCV 4.8.0, you'll need to use the aruco module in your code. Here's the modified code that detects the Aruco markers in your given 7x10 table with 34mm marker size and DICT_6x6 dictionary:

    import cv2 as cv
    import cv2.aruco as aruco
    
    # Set Aruco dictionary and parameters
    aruco_dict = aruco.Dictionary_get(aruco.DICT_6X6_250)
    aruco_params = aruco.DetectorParameters_create()
    
    # Load image
    fname = "path/to/your/image.jpg"
    img = cv.imread(fname)
    
    # Convert image to grayscale
    gray = cv.cvtColor(img, cv.COLOR_BGR2GRAY)
    
    # Detect Aruco markers
    corners, ids, rejectedImgPoints = aruco.detectMarkers(gray, aruco_dict, parameters=aruco_params)
    
    # Draw detected markers
    if ids is not None:
        img = aruco.drawDetectedMarkers(img, corners, ids)
    
    # Set Aruco grid board
    board = aruco.GridBoard_create(7, 10, 0.034, 0.008, aruco_dict)
    
    # Estimate board pose
    retval, rvec, tvec = aruco.estimatePoseBoard(corners, ids, board, cameraMatrix, distCoeffs)
    
    # Draw board axis if found
    if retval > 0:
        img = aruco.drawAxis(img, cameraMatrix, distCoeffs, rvec, tvec, 0.1)
    
    # Display the resulting image
    cv.imshow('Aruco Table Detection', img)
    cv.waitKey(0)
    cv.destroyAllWindows()
    

    Note that you'll need to replace path/to/your/image.jpg with the actual path to your image file, and you need to provide the camera matrix (cameraMatrix) and distortion coefficients (distCoeffs) for your camera. These values can be obtained by calibrating your camera using OpenCV or any other calibration tool.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.

Identical first prompt