Skip to content
TheChatArchiveThe Chat Archive
Mistralmixtral-8x7b-instruct-v0.1· Mistral AIHugging Face Arena Human Preference 55K

EXAMPLE 46 N4 -Benzyloxycarbonyl-1-(Boc-aeg) cytosine N-Boc-aminoethyl glycine ethyl…

From a Chatbot Arena battleThe same person sent this prompt to two anonymous models at once. Compare it with gpt-3.5-turbo-1106’s answer.
  1. User

    EXAMPLE 46

    N4 -Benzyloxycarbonyl-1-(Boc-aeg) cytosine

    N-Boc-aminoethyl glycine ethyl ester (5.00 g; 20.3 mmol), DhbtOH (3.64 g; 22.3 mmol) and N4-benzyloxycarbonyl-1-carboxymethyl cytosine (6.77 g; 22.3 mmol) were suspended in DMF (100 ml). Methylene chloride (100 ml) then was added. The solution was cooled to 0° C. and DCC (5.03 g; 24.4 mmol) was added. The ice bath was removed after 2 h and stirring was continued for another hour at ambient temperature. The reaction mixture then was evaporated to dryness, in vacuo. The residue was suspended in ether (100 ml) and stirred vigorously for 30 min. The solid material was isolated by filtration and the ether wash procedure was repeated twice. The material was then stirred vigorously for 15 min with dilute sodium hydrogencarbonate (aprox. 4% solution, 100 ml), filtered and washed with water. This procedure was then repeated once, which after drying left 17.0 g of yellowish solid material. The solid was then boiled with dioxane (200 ml) and filtered while hot. After cooling, water (200 ml) was added. The precipitated material was isolated by filtration, washed with water, and dried. According to HPLC (observing at 260 nm) this material has a purity higher than 99%, besides the DCU. The ester was then suspended in THF (100 ml), cooled to 0° C., and 1N LiOH (61 ml) was added. After stirring for 15 minutes, the mixture was filtered and the filtrate was washed with methylene chloride (2x150 ml). The alkaline solution then was cooled to 0° C. and the pH was adjusted to 2.0 with 1N HCl. The title compound was isolated by filtration and was washed once with water, leaving 11.3 g of a white powder after drying. The material was suspended in methylene chloride (300 ml) and petroleum ether (300 ml) was added. Filtration and wash afforded 7.1 g (69%) after drying. HPLC showed a purity of 99% RT= 19.5 min, and a minor impurity at 12.6 min (approx. 1%) most likely the Z-de protected monomer. Anal. for C23 H29 N5 O8 found (calc.) C: 54.16 (54.87); H: 5.76(5.81) and N: 13.65(13.91). 1 H-NMR (250 MHz, DMSO-d6). 10.78 (b.s, 1H, CO2 H); 7.88 (2 overlapping dublets, 1H, Cyt H-5); 7.41-7.32 (m, 5H, Ph); 7.01 (2 overlapping doublets, 1H, Cyt H-6); 6.94 & 6.78 (unres. triplets, 1H, BocNH); 5.19 (s, 2H, PhCH2); 4.81 & 4.62 (s, 2H, CH2 CON); 4.17 & 3.98 (s, 2H, CH2 CO2 H); 3.42-3.03 (m, includes water, CH2 CH2) and 1.38 & 1.37 (s, 9H, t Bu). 13 C-NMR. 150.88; 128.52; 128.18; 127.96; 93.90; 66.53; 49.58 and 28.22. IR: Frequency in cm-1 (intensity). 3423 (26.4), 3035 (53.2), 2978(41.4), 1736(17.3), 1658(3.8), 1563(23.0), 1501(6.8) and 1456 (26.4).

    For each reaction described in the input text, convert the text to a JSON format. Use only the following keys - "depends-on-another-procedure" (Either "False" or the name of the depended-upon procedure which is referenced in the passage), "contains-chemical-reaction" ("True" or "False", whether the passage contains a description of a chemical reaction (a process in which the chemical bonds of a molecule are altered). If the passage does not, or if the intended product of the passage is a polymer, a mixture, a formulation, or something besides a molecular substance, simply answer "False". Otherwise answer "True"). If contains-chemical-reaction is "True", also include the following keys - "reactants" (any named chemical entity required for the reaction to proceed, heat, light, electrochemistry, and flow chemistry should be included as reactants); "catalysts" (any named chemical entity that accelerates the rate of the reaction); "solvents" (any named chemical entity that acts as the reaction medium); "intermediates" (any named chemical entity formed during a middle step of the reaction); "workup_reagents" (any named chemical entity used once the reaction is complete to isolate and purify the product); "byproducts" (any named chemical entity that is the outcome of the reaction that is not the product); and "products" (desired named chemical entity generated from the reaction). Do not include a given chemical entity in more than one key. If it is unclear which key a chemical entity belongs in, include it in the "reactants" key. For each key include the common or IUPAC chemical name in a "name" sub-key, the passage-specific label for a compound in an "alt-name" sub-key, and include three sub-keys called "mass", "volume" and "molar quantity". Fill each "name", "alt-name", and each sub-key with a value if given, otherwise fill the value with "N/A". For the "mass" sub-key, include a sub-key called "unit". Acceptable values for this sub-key are any unit of mass or "N/A". For the "volume" sub-key, include a sub-key called "unit". Acceptable values for this sub-key are any unit of volume or "N/A". For the "molar quantity" sub-key, include a sub-key called "unit". Acceptable values for this sub-key are any unit of moles or "N/A". for the "product" sub-key, include a sub-key called "yield" and record the yield of the reaction. Analytical data such as melting temperature, NMR, IR, etc. should be excluded. Do not use line breaks or unnecessary whitespace in the output. Below is an example of the JSON format to output: {"reactions":[{"depends-on-another-procedure":"The general procedure", "contains-chemical-reaction":"True", "reactants": [{"name":"example reactant 1", "alt-name":"compound 3", "mass":{"value":"10","unit":"milligram"}, "volume":{"value":"N/A","unit":"N/A"}, "molar quantity":{"value":"1.50","unit":"mmol"}}, {"name":"example reactant 2", "alt-name":"A2", "mass":{"value":"20","unit":"milligram"}, "volume":{"value":"N/A","unit":"N/A"}, "molar quantity":{"value":"2.25","unit":"mmol"}}], "catalysts":[{"name":"example catalyst 1", "alt-name":"N/A", "mass":{"value": "N/A","unit":"N/A"}, "volume":{"value": "N/A","unit":"N/A"}, "molar quantity":{"value":"0.01","unit":"mmol"}}], "solvents":[{"name":"example solvent 1", "alt-name":"N/A", "mass":{"value":"N/A","unit":"N/A"}, "volume":{"value":"30","unit":"milliliter"}, "molar quantity":{"value":"N/A","unit":"N/A"}}], "intermediates":[{"name":"example intermediate 1", "alt-name":"N/A", "mass":{"value":"N/A","unit":"N/A"}, "volume":{"value":"N/A","unit":"N/A"}, "molar quantity":{"value":"N/A","unit":"N/A"}}], "workup reagents":[{"name":"example workup reagent 1", "alt-name":"N/A", "mass":{"value":"N/A","unit":"N/A"}, "volume":{"value":"100","unit":"milliliter"}, "molar quantity":{"value":"N/A","unit":"N/A"}}], "products":[{"name":"example product 1", "alt-name":"Amine salt", "mass":{"value":"30","unit":"milligram"}, "volume":{"value":"N/A", "unit":"N/A"}, "molar quantity":{"value":"N/A","unit":"N/A"}, "yield":"85%"}], "byproducts":[{"name":"example byproduct 1", "alt-name":"N/A", "mass":{"value":"1.2","unit":"gram"}, "volume":{"value":"N/A","unit":"N/A"}, "molar quantity":{"value":"N/A","unit":"N/A"}}]}]}

  2. Mistral Assistant

    { "reactions": [ { "depends-on-another-procedure": "False", "contains-chemical-reaction": "True", "reactants": [ { "name": "N-Boc-aminoethyl glycine ethyl ester", "alt-name": "Boc-aeg", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "N/A", "unit": "N/A" }, "molar quantity": { "value": "20.3", "unit": "mmol" } }, { "name": "DhbtOH", "alt-name": "N/A", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "N/A", "unit": "N/A" }, "molar quantity": { "value": "22.3", "unit": "mmol" } }, { "name": "N4-benzyloxycarbonyl-1-carboxymethyl cytosine", "alt-name": "N4-benzyloxycarbonyl-1-(Boc-aeg) cytosine", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "N/A", "unit": "N/A" }, "molar quantity": { "value": "22.3", "unit": "mmol" } } ], "catalysts": [ { "name": "DCC", "alt-name": "N/A", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "N/A", "unit": "N/A" }, "molar quantity": { "value": "24.4", "unit": "mmol" } } ], "solvents": [ { "name": "DMF", "alt-name": "N/A", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "100", "unit": "milliliter" }, "molar quantity": { "value": "N/A", "unit": "N/A" } }, { "name": "Methylene chloride", "alt-name": "DCM", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "100", "unit": "milliliter" }, "molar quantity": { "value": "N/A", "unit": "N/A" } } ], "intermediates": [ { "name": "N4-benzyloxycarbonyl-1-(Boc-aeg) cytosine", "alt-name": "N/A", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "N/A", "unit": "N/A" }, "molar quantity": { "value": "N/A", "unit": "N/A" } } ], "workup_reagents": [ { "name": "Ether", "alt-name": "N/A", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "100", "unit": "milliliter" }, "molar quantity": { "value": "N/A", "unit": "N/A" } }, { "name": "Sodium hydrogencarbonate", "alt-name": "N/A", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "100", "unit": "milliliter" }, "molar quantity": { "value": "N/A", "unit": "N/A" } }, { "name": "Water", "alt-name": "N/A", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "200", "unit": "milliliter" }, "molar quantity": { "value": "N/A", "unit": "N/A" } } ], "byproducts": [ { "name": "DCU", "alt-name": "N/A", "mass": { "value": "N/A", "unit": "N/A" }, "volume": { "value": "N/A", "unit": "N/A" }, "molar quantity": { "value": "N/A", "unit": "N/A" } } ], "products": [ { "name": "N4-benzyloxycarbonyl-1-(Boc-aeg) cytosine", "alt-name": "N/A", "mass": { "value": "11.3", "unit": "gram" }, "volume": { "value": "N/A", "unit": "N/A" }, "molar quantity": { "value": "N/A", "unit": "N/A" }, "yield": "69%" } ] } ] }

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.