% Initialization clearvars; % Clears all variables in the workspace set(gcf, 'renderer',…
- User
% Initialization clearvars; % Clears all variables in the workspace set(gcf, 'renderer', 'opengl'); % Choses the painters graphics system
% Simulation domain and grid creation Lx = 0.42; % Length of the simulation domain (fetch) Ly = 0.36; % Width of the simulation domain (cross-fetch) nx = 420; % Number of spatial points in fetch-direction ny = 360; % Number of spatial points in cross-fetch-direction x = linspace(0, Lx, nx); % Fetch linearly spaced vector y = linspace(0, Ly, ny); % Cross-fetch lianearly spaced vector [X, Y] = meshgrid(x, y); % 2D grid representing the water surface
% Wave parameters for multiple wavelengths g = 9.84; % Measured local gravitational acceleration (m/s^2) wavelengths = [0.03, 0.024 * rand() + 0.005, 0.024 * rand() + 0.005]; % Wavelengths (m) c = sqrt(g ./ wavelengths / (2 * pi)); % Wave speeds for each wavelength amplitudes = [0.001, (0.9 - 0.5) * rand() + 0.5, (0.9 - 0.5) * rand() + 0.5] * 1e-3; % Amplitudes (m) directions = [0, 0.05 + (0.25 - 0.05) * rand(), 0.05 + (0.25 - 0.05) * rand()]; % Directions (rad) phases = [0, -0.5 + (0.5 - (-0.5)) * rand(), -0.5 + (0.5 - (-0.5)) * rand()]; % Phases (rad) damping = 0.05; % Damping factor g_lambda_over_2pi = g .* wavelengths / (2 * pi); % Precompute the constants for each wavelength
% Calculating spatial steps and a CFL compliant time step dx = Lx / (nx - 1); % Spatial step in the x-direction dy = Ly / (ny - 1); % Spatial step in the y-direction c_max = sqrt(g * max(wavelengths) / (2 * pi)); % Maximum wave speed for the CFL condition dt = min([dx dy]) / (sqrt(2) * c_max); % Time step size respecting the CFL condition t_end = 10; % Total simulation time in seconds t = 0:dt:t_end; % Time vector from 0 to t_end with increments of dt u = gpuArray(zeros(ny, nx, 3)); % Initial wave field for all wavelengths u_prev = gpuArray(u); % Previous wave field for all wavelengths u_next = gpuArray(u); % Next wave field for all wavelengths u = zeros(ny, nx, length(wavelengths)); % Initialize 3D array for wave elevation
% Initialize plot for animation figure; % Creates a new Matlab figure insta_surface = surf(X, Y, zeros(size(X)), 'EdgeColor', 'none'); % Initialize a flat surface axis([0 Lx 0 Ly -0.05 0.05]); % Sets the z-axis from -5 cm to 5 cm, disabling autoscaling ax = gca; % Assign the current axes to ax ax.XColor = 'blue'; % Sets the fetch axis tick labels to blue ax.YColor = 'blue'; % Sets the cross-fetch axis tick labels to blue ax.ZColor = 'blue'; % Sets the amplitude axis tick labels to blue title('Wind induced water waves', 'Color', 'blue'); % Title of the animation xlabel('Fetch (m)', 'Color', 'blue'); % Label of the fetch axis, defined in meters ylabel('Cross-fetch (m)', 'Color', 'blue'); % Label of the cross-fetch axis, defined in meters zlabel('Elevation (m)', 'Color', 'blue'); % Label of the wave amplitude axis in meters
%Setting lighting for increased realism colormap('winter'); % Sets the colorset to winter as it better represents water colors lightangle(-45, 30); % Sets the light angle to make the waves more visible lighting phong; % The phong setting gives lighted surfaces a smoother gradient material shiny; % Sets the reflective properties of the surface to mimick water shading interp; % Interpolate colors across surfaces and lines
% Assuming u, u_prev, and u_next are 3D arrays with the third dimension for each wavelength % Assuming g_lambda_over_2pi is an array with a constant for each wavelength
% Animation loop for ti = t % Reset the combined wave field u_combined = zeros(size(u(:,:,1)));
% Update the wave field for each wavelength for w = 1:length(wavelengths) % Calculate the wave field at the next time step for wavelength 'w' for j = 2:(ny-1) for i = 2:(nx-1) % Calculate the Laplacian of u for wavelength 'w' laplacian = (u(j, i+1, w) - 2*u(j, i, w) + u(j, i-1, w)) / dx^2 + ... (u(j+1, i, w) - 2*u(j, i, w) + u(j-1, i, w)) / dy^2; % Update the wave field using the wave equation for wavelength 'w' u_next(j, i, w) = 2*u(j, i, w) - u_prev(j, i, w) + dt^2 * g_lambda_over_2pi(w) * laplacian; end end % Apply boundary conditions for wavelength 'w' if necessary % ... % Combine the wave field of wavelength 'w' into the total wave field u_combined = u_combined + u_next(:,:,w); % Update the plot every N iterations to reduce overhead if mod(ti, N) == 0 % Transfer data from GPU to CPU for plotting u_cpu = gather(u); set(insta_surface, 'ZData', u_cpu); title(sprintf('Time: %0.2f seconds', ti), 'Color', 'blue'); drawnow; end % Prepare for the next iteration u_prev = u; u = u_next;end
- Assistant
This is a MATLAB code for simulating wind-induced water waves using the finite difference method. It solves the wave equation for multiple wavelengths and combines the wave fields to create a total wave field. The simulation runs for a specified time period, and the resulting wave elevation is plotted using a 3D surface plot.
Here's a brief summary of the code:
- Initialize variables and constants:
Lx,Ly,nx, andnyare the lengths and number of spatial points in the fetch and cross-fetch directions, respectively.wavelengths,c,amplitudes, anddirectionsare arrays of wavelengths, wave speeds, amplitudes, and directions, respectively, for multiple wavelengths.dampingis a damping factor.g_lambda_over_2piis an array of constants calculated from the gravitational acceleration and wavelengths.
- Create a 2D grid:
XandYare linearly spaced vectors representing the fetch and cross-fetch directions, respectively.meshgrid(X, Y)creates a 2D grid of spatial points.
- Initialize the wave field:
uis a 3D array representing the wave field for all wavelengths.u_prevandu_nextare 3D arrays representing the previous and next wave fields, respectively.
- Set up the animation loop:
tis a vector of time steps from 0 tot_endwith increments ofdt.dtis the time step size, which is chosen to satisfy the Courant-Friedrichs-Lewy (CFL) condition.
- Loop over time steps:
- For each time step, calculate the Laplacian of the wave field for each wavelength and update the wave field using the wave equation.
- Apply boundary conditions for each wavelength, if necessary.
- Combine the wave fields of all wavelengths into a total wave field.
- Update the plot every
Niterations to reduce overhead.
- Plot the results:
- Use
surf(X, Y, u_cpu, 'EdgeColor', 'none')to create a 3D surface plot of the wave elevation. - Set the title, axis labels, and color scheme.
- Use
lightangle(-45, 30)to set the light angle andlighting phongto give the waves a smoother gradient. - Use
material shinyto set the reflective properties of the surface to mimic water. - Use
shading interpto interpolate colors across surfaces and lines.
- Use
- Run the animation loop:
- Run the animation loop from
ti = 0toti = t_end. - Update the plot every
Niterations.
- Run the animation loop from
Note that this code assumes that the wave field is represented as a 3D array, with the third dimension corresponding to the different wavelengths. The boundary conditions and the update of the wave field using the wave equation are not shown in the code snippet provided.
- Initialize variables and constants:
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.